Tycho
Tycho is a printer that is the definition of excess. What once started as a K2, has evolved into something utterly stupid. I have decided to move onto building something a bit more "robust", "different", and a bit smaller. Thus I am releasing the printer in its "finished" state, bugs and all. This will be the only release.
There is no sourcing guide or frame calculator, nor is there really help. Ive built one of these things, if you want to build one too, please visit our discord
Our discord server can be found here:
Stats:
-
Fully Enclosed Design
-
2020, 2040, and 2060 Frame Members
-
Insulated Build Chamber (Not Heated)
-
Build Volumes of ~250^3 to 600^3 (use of whole plate available) + additional area to purge and wipe
- Z can theoretically be 1m tall, just not fully supported or tested
-
Direct Drive Extruder - Sherpa Heavy Only
-
Shortest Belt Paths Possible, 8 Motors, 4 Per X, 4 Per Y Axis
-
Moving Bed, Fixed Gantry
-
MGN12C Rails for XYZ Stationary Rails
-
MGN12C Rails with Folded Stainless Steel Backers for XY Cross (Moving Members)
-
12mm 2GT Belts on XY Motion
-
12mm 2GT Belts with 20:1 Worm Drive on Z to lift the Bed
- Hybrid Laser Cut Metal and Printed Part Construction
-
Heavy Duty 608 XY Bearings, 625 on Z
-
NEMA17 Motors XYZE
-
Minimal Printed Parts (ABS or ASA Required, PC Recommended for motion components)
-
Fysetc Spider + ANNEX Supernova x3 Required
-
Mosquito Mag+ Hotend Only
-
24V/48V Hybrid System, Required to hit max speeds
-
Mains Bed