Denali - Release 1
Project Denali is a CoreXY, Moving Bed, Medium Size, Direct Drive, FDM Printer
The main goal was to reduce complexity, while providing a fast reliable and ultimately simpler printer.
Our discord server can be found here:
BOM/Sourcing Guide for a 250x250x200 Build can be found here: https://docs.google.com/spreadsheets/d/1O3eyVuQ6M4F03MJSDs4Z71_XyNjXL5HFTZr1jsaAtRc/edit?usp=sharing Frame Calculator: https://docs.google.com/spreadsheets/d/17bdA1itJfFXpg5xXoUhM7PC9FFtjTBpXj1FjgBG_8xA/edit?usp=sharing
This printer features the following:
- Fully Enclosed Design
- Supported Build Volumes of ~200x200x200 to ~350x350x300
- Single Direct Drive Fed Extruder (V6, Dragon and Mosquito Hotends Supported)
- CoreXY Belt Path
- Moving Bed with Tri-Stepper Leveling and Squaring
- MGN9H Rail/Carriage Combo on all Axis
- Dual Rail X Axis for Increased Stability
- 0.9 Deg XY Steppers, 1.8 Deg Z and E Steppers
- 6mm Belts on XY, 1204 Ballscrews on Z
- Minimal Printed Parts
- Designed to be Printed with ABS
- 32 bit controller standard, Dual Bigtree Tech SKRs + TMC2209 Drivers or Single FYSETC S6 + TMC2209 Drivers
- 24V Power Standard
- AC Mains Bed with Thermal Cutoff Fusing
- Powered by Klipper: https://github.com/KevinOConnor/klipper/
