This repository contains a z80 assembler, both as a command-line tool, and as a library. It currently is somewhat limited, both in assembler features (for example, there's no macros), and can currently only output ZX-Spectrum .sna files. But the assembler does implement the full (standard) z80 instruction set.
The code is MIT licensed, and the details can be found in LICENSE.txt.
Assembler instructions are case-insensitive, with destination registers (or addresses)
appearing before source when applicable. Hex numbers can be used, and are written with
a 0x prefix.
For example:
ld a, 42
jp label
ld b, 0x10
Multiple instructions may be written on one line, by separating them by ;.
ld a, 42 ; inc a
Indirection uses regular brackets (). For example:
ld hl, (123)
sub (hl)
ld (hl), d
Indirection via ix and iy use syntax like this: (ix+4). For example:
ld (ix+4), 42
Comments use // or /* ... */ (which don't nest). For example, this code generates the single instuction ld a, (de):
/* The next two instructions are commented out.
ld a, 42
ld b, 42 */
ld a, (de) // This is a comment
Labels are written in one of two forms: a name followed by a colon, or a dot followed by a name. The label: form denotes a major label, and the .label form denotes a minor label. Minor labels are relative to the most recent major label, and can only be accessed in that scope. This allows minor labels to be reused.
For example:
f:
ld bc, 42
.loop
djnz loop
g:
ld bc, 102
.loop
djnz loop
This defines two major labels f and g and two minor labels, both called
loop.
A special label main: defines the entrypoint for the code.
Where applicable, constants may be expressions written in C (or equivalently go) syntax. For example:
ld a, 4+10
There are several assembler directives: org which speficies where to assemble, and db, dw, ds
which allow literal bytes, words (16 bits, written low-byte first), and strings. For example:
org 0x9000
db 1, 2, 3
dw 0x1234
ds "hello\n"
This causes the following bytes to be generated at and beyond memory location 0x9000:
1, 2, 3, 0x34, 0x12, 'h', 'e', 'l', 'l', 'o', 0x0a
A two-value variant of org allows the PC and target memory to be specified separately that may be useful if there is a larger amount of RAM that can
be paged in via a memory map, for example like that on the Spectrum Next.
org 0x9000, 0xff0000
.label
db 1, 2, 3, 4
dw label
This causes the following bytes to be generate at memory location 0xff0000:
1, 2, 3, 4, 0x00, 0x90
Named constants can be defined with const, and used thereafter:
const x = 0xabcd
dw x & 0xf0f0
If you want the length of a string (for example as an 8-bit value), you can use label arithmetic. Note that it is fine to refer to labels before they appear:
db endhello - hello
.hello ds "hello\n"
.endhello
This generates the bytes: 6, 'h', 'e', 'l', 'l', 'o', 0x0a.