Yoti Idemix DCRP
This repository contains the scripts to run a DCRP (Distributed Cryptographic Routing Protocol) network with Idemix issuers and verifiers.
Installation steps
The scripts use Docker to deploy all services. Please, install it before running the scripts.
- Clone this repository and navigate to its root folder.
- Run the script
start.sh.
The script needs three parameters:
- The IP address where the service will be deployed. It's the address the other nodes needs to know to reach your node.
- Idemix user name. It's the name to log in inside the Idemix panels (Default: admin).
- Idemis user password. It's the password to log in inside the Idemix panels (Default: yotiadmin).
Parameters 2 and 3 are not required.
This is an example how the command should be executed:
./start.sh 192.168.1.20 myuser mypassword
This script will deploy a node that will run the membership for DCRP network, 3 issuers and 3 verifiers.
| App | Port |
|---|---|
| Node front-end | 8080 |
| Node | 8181 |
| Issuer1 front-end | 4000 |
| Issuer1 | 4010 |
| Issuer2 front-end | 4001 |
| Issuer2 | 4011 |
| Issuer3 front-end | 4002 |
| Issuer3 | 4012 |
| Verifier1 front-end | 4003 |
| Verifier1 | 4013 |
| Verifier2 front-end | 4004 |
| Verifier2 | 4014 |
| Verifier3 front-end | 4005 |
| Verifier3 | 4015 |
Deploy a master node
The script start_master_node.sh will deploy a master node. This node won't have any service. Use this script to test the network in your local machine.
The script needs 5 arguments:
- The IP address where the service will be deployed. It's the address the other nodes needs to know to reach your node.
- The port where the front-end will be deployed.
- The port where the node will be deployed.
- The Docker container name (Default: master_node).
- The node addresses the current master node will try to connect automatically when it is deployed.
The agruments 4 and 5 are not required.
Following an example that a node that will connect with the node deployed in previous section:
./start_master_node.sh 192.168.1.20 8888 8989 master_node_2 192.168.1.20:8181
Test 100 nodes
The script run_100_nodes.sh will deploy 100 nodes without any service. This is a way to test the network in your local machine.
The script will take the ports from 8000 to 8199 to deploy the node and the front-end applications. It only needs the user provides the IP address where the service will be deployed. For example:
./run_100_nodes.sh 192.168.1.20