Describe your project
Please describe the steps to install this project.
For example:
-
Open this file
-
Edit as you like
Assemble the circuit following the diagram layout.png attached to the sketch
Upload the code contained in this sketch on to your board
Azul => Arduino sketch folder ├── Azul.ino => main Arduino file ├── schematics.png => (optional) an image of the required schematics ├── layout.png => (optional) an image of the layout └── ReadMe.adoc => this file
To contribute to this project please contact Jordy <jordyfaria0@gmail.com>
Add the bill of the materials you need for this project.
ID |
Part name |
Quantity |
A1 |
Arduino Mega |
1 |
MQ-2 |
Smoke gas sensor |
1 |
MQ-7 |
Carbon Monoxide Sensor |
1 |
DHT |
Temperature/humidity sensors |
1 |
DMS |
Dust sensor |
1 |
L238N |
DC motor drive |
1 |
DC |
Motor DC |
2 |
This document is written in the AsciiDoc format, a markup language to describe documents. If you need help you can search the AsciiDoc homepage or consult the AsciiDoc cheatsheet