HoRNDIS(the USB tethering driver for Mac OS X)

HoRNDIS (pronounce: "horrendous") is a driver for Mac OS X that allows you to use your Android phone's native USB tethering mode to get Internet access.

For more information, visit the home page for HoRNDIS on my site.

Installation

From Source/Binary

Get the installation package (Download or Build the installation package from source yourself)
Run the installation package

From Homebrew

brew cask install horndis
sudo kextload /Library/Extensions/HoRNDIS.kext

Configuration

Assuming that the installation proceeds without errors, after it completes, connect your phone to your Mac by USB.
Enter the settings menu on your phone.
In the connections section, below Wi-Fi and Bluetooth:
- Select "More..."
- Select "Tethering & portable hotspot"
Check the "USB tethering" box. It should flash once, and then become solidly checked.

Uninstallation

Delete the HoRNDIS.kext under /System/Library/Extensions and /Library/Extensions folder
Restart your computer

Building the source

git clone the repository
Simply running xcodebuild in the checkout directory should be sufficient to build the kext.
If you wish to package it up, you can run make to assemble the package in the build/ directory

Debugging and Development Notes

This sections contains tips and tricks for developing and debugging the driver.

USB Device Information

Mac OS System Menu -> About This Mac -> System Report --> Hardware/USB
Lists all USB devices that OS recognizes. Unfortunately, it does not give USB descriptors.

lsusb -v
It prints USB configuration, such as interface and endpoint descriptors. You can print it for all devices or limit the output to specific ones. In order to run this command, you need to install usbutils.

Homebrew users: brew install mikhailai/misc/usbutils
Please do not install lsusb package from Homebrew Core, it's a different utility with the same name.
Macports users: sudo port install usbutils

IO Registry

ioreg -l -r -c IOUSBHostDevice
This command lists all the Mac OS IO Registry information under all USB devices. Unlike lsusb, ioreg tells how Mac OS recognized USB devices and interfaces, and how it matched drivers to these interfaces. The -r -c IOUSBHostDevice limits the output to USB devices; to get complete OS registry, please run ioreg -l.

OS Logging

The LOG(....) statements, sprinkled throughout the HoRNDIS code, call the IOLog functions. On Mac OS El Capitan (10.11) and earlier, the log messages go into /var/log/system.log. Starting from Sierra (10.12), these messages are no longer written to system.log and instead can be viewed via:

GUI, using Console application, located in Utilities folder. You need to enter process:kernel in the search box in order to filter the relevant messages.
Command Line, using the log command. For example:
log show --predicate process==\"kernel\" --start "2018-12-11 22:54:00"
The start value needs to be several minutes in the past, so it would not flood the console. Here is a convenient command that prints the messages from the past 3 mintes:
log show --predicate process==\"kernel\" --start "$(date -v-3M +'%F %T')"

I've observed that Mac OS logging is unreliable (especially in Sierra). In some cases, the messages may come out garbled (looking like bad multi-threaded code). In other cases, either GUI or Command Line may be missing messages that were emitted. Sometimes, reloading the driver may fix the problem.

Aiola13 / HoRNDIS