Eugen's starred repositories
KNX_Sonoff_4Ch_Pro_Rev2
ETS programmable/configurable Firmware for ESP8266 MCU platform based on the Sonoff S20 example in thelsings KNX-Library.
bms-to-inverter
Use, monitor and control any battery brand with any inverter! Application to read and monitor data from BMSes and write data to an inverter using any protocol (e.g. UART, RS485, ModBus or CAN)
esphome-tesla-ble
Interact with Tesla vehicles over BLE using ESPHome and Home Assistant
Deye_Battery_Serial_BUS
Reverse engineered Deye battery serial bus reader
smartthings
A fork of the Home Assistant SmartThings Integration. This adds better support for Samsung OCF Devices.
TeslaBleHttpProxy
TeslaBleHttpProxy is a program written in Go that receives HTTP requests and forwards them via Bluetooth to a Tesla vehicle. The program can, for example, be easily used together with evcc.
deye-microinverter-cloud-free
Documentation and tooling to use Deye microinverters without the solarman cloud
ESPSomfy-RTS
A controller for Somfy RTS shades and blinds
ha_epex_spot_sensor
Provides helper sensors for EPEX Spot integration.
RejsaCAN-ESP32
ESP32 and ESP32-S3 board with CAN interface, runs on 12V power (with auto shutdown)
deye-logger-at-cmd
Easily extract login credentials and WLAN keys from Deye and compatible (e.g. Bosswerk, Turbo-E) microinverters without authentication :)
esphome-jk-bms-can
ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon
EastronSDMreplicator
Eastron SDM630 Modbus (Man) In The Middle
ModbusMechanic
Cross platform GUI MODBUS TCP/RTU simulator & gateway. Interprets data types including ascii float and int.
esp32-ttnmapper-gps
Code to make experiment on TTN Mapper with GPS and TTGO
power-flow-card-plus
A power distribution card inspired by the official Energy Distribution card for Home Assistant
arduino-home-assistant
ArduinoHA allows to integrate an Arduino/ESP based device with Home Assistant using MQTT.
esphome-solax-x1-mini
ESPHome component to monitor a Solax X1 mini via RS485
addon-cloudflared
Connect remotely to your Home Assistant instance without opening any ports using Cloudflared.
hassio-google-drive-backup
Automatically create and sync Home Assistant backups into Google Drive
esphome-pace-bms
ESPHome component to monitor and control a PACE Battery Management System (PACE-BMS) via RS485 (Modbus)
slider-button-card
A button card with integrated slider
lovelace-slider-entity-row
🔹 Add sliders to entity cards