ARM-software / sbsa-acs

ARM Enterprise: SBSA Architecture Compliance Suite

ARM-software/sbsa-acs Issues

Drop PCIe tests
Closed a month ago2
Test 23 does not accept CSV2_3
Updated 2 months ago
PE Test 16 (Check MPAM LLC Requirements) doesn't support the case where ACPI MAPM's MSCs are PCC based
Updated 2 months ago2
Since when Cortex-A57 has pointer authentication?
Closed 2 months ago1
PE Test 16 checks wrong offset in Descriptor1 of locator in ACPI MPAM table
Closed 2 months ago
WORKSPACE can point to any place
Closed 2 months ago6
PCIe Test 025 : The Enable No Snoop Bit(bit11) value and attribute is incorrect
Closed 3 months ago4
Features not supported causes test item to fail
Closed 3 months ago3
Port "-el1physkip" from BSA-ACS
Closed 4 months ago
ACS Linux failed to mount result partition
Closed 5 months ago1
Wakeup timer interrupt usage issue
Closed 5 months ago11
Why PE test 16 (rule S_MPAM_PE) limits the resource tpye to PE cache only?
Closed 5 months ago11
Enhancement to val_pcie_mem_get_offset
Closed 6 months ago2
SBSATimer use interrupt issue
Closed 7 months ago16
PE test 16 (rule S_MPAM_PE) could be more verbose on failure
Closed 10 months ago1
Add an option to run only selected tests
Closed 10 months ago1
test 861: Received exception of type: 0
Closed 10 months ago17
Rename test 314?
Closed a year ago2
Tests 828/829 (PCIe Power management ones) need better message?
Closed a year ago3
Rename test 309?
Closed a year ago1
Exerciser Sbsa compliance is only from Level 4
Closed a year ago2
Secondary core cannot get test function vector in val_test_entry
Closed a year ago2
Test 16 (Check MPAM LLC Requirements) should check MPAM before PPTT LLC
Closed a year ago2
SBSA Linux failure - 406: No extra addr translation - SMMU
Closed a year ago1
Skip module header on skipped module?
Closed a year ago1
let test 803 ignore legacy PCI cards?
Closed a year ago1
Rename test 30 to be more precise?
Closed a year ago1
Rename test 315?
Closed a year ago
PCIe tests are not skippable
Closed a year ago2
test 301 lacks S_L4SM_01 and S_L5SM_01 rules
Closed a year ago3
Use granular commits?
Updated a year ago5
The message from SBSA test "3 : Check AARCH64 implementation" is not enough
Updated a year ago2
Test 861 uses S_PCI_02 tag which is not in SBSA spec
Closed a year ago4
S_L4PCI_2 is tested only on SBSA level 6+
Closed a year ago3
Synchronize level checks?
Closed a year ago3
Test 301 has badly formatted output on failure
Closed a year ago1
"Should support" does not sounds properly
Closed a year ago
PE Test015-"Check MPAM PE Requirements" Need judg Nerverse N2 version.
Closed a year ago2
S_L3SM_01 is not tested on level 3
Closed a year ago3
test 457 lacks SBSA reference
Closed a year ago2
SBSA test "1301 : Check peripherals addr 64Kb apart" issues
Closed a year ago3
MPAM (PE test 15) should fail on level 7
Closed a year ago2
Error: unknown or missing system register name at operand 2 -- `mrs x0,mpam1_el1'
Closed a year ago1
sbsa-acs-master\val\src\avs_pe.c : In "val_pe_reg_read "undefined reference to few functions (ArmReadMpidr)
Closed 2 years ago5
SBSA Linux Test 407 should not check the RCiEP that doesn't support interrupt
Closed 2 years ago1
Test 430 endlessly prints messages
Closed 2 years ago2
Test cases like 441 for RCiEP and i-EP should not be run by default
Closed 2 years ago2
Test 441 should not check the RCiEP that doesn't support interrupt
Closed 2 years ago1
SBSA PE tests do not execute successfully on aarch64 machines due to secondary stack alignment issue
Closed 2 years ago5
PSCI conduit is assumed to be SMC
Closed 2 years ago2