AAlvz / abp-infrastructure

Puppet-based configuration definitions for various servers used by the Adblock Plus project.

Adblock Plus infrastructure

The Adblock Plus infrastructure uses Puppet to set up servers, and to have a realistic development environment.

Our Puppet manifests are only tested with Ubuntu 12.04 right now.

Private files

Some parts of our infrastructure are, obviously, confidential. We have htpasswd files, SSH keys and SSL certificates that we need to be careful with.

That's why modules/private is missing, and needs to be placed there manually. We provide stub versions of all those files in modules/private-stub, so just linking or copying that to modules/private will make everything work locally.

Development environment

As with our other projects, all changes to our infrastructure should be made in a local development environment, and reviewed before deployment. Thanks to Puppet, we can easily set up local VMs that mirror our production environment.

The most convenient way to do this is to use Vagrant, as described below.

Requirements

• VirtualBox
• Vagrant
• modules/private exists (see above)

Start a VM

For each production server, we have a Vagrant VM with the same host name.

To start the filter1 VM:

vagrant up filter1

After you've made changes to Puppet manifests, you can update it like this:

vagrant provision filter1

You can omit the VM name if you want to boot or provision all VMs. This might take a while and eat quite a bit of RAM though.

SSH to the server

You can use vagrant to connect as the vagrant user:

vagrant ssh server5

If you want to test "real" SSH access you can use the test user account defined in private-stub:

ssh -i modules/private/files/id_rsa test@10.8.0.100

The default password for this user (required for the sudo command) is "test".

Adding a server

To set up a new server, you should first add it to the development environment and test the setup, then set up a corresponding production server.

Development environment

1. Add entries in Vagrantfile and manifests/vagrant.pp

2. Add the host name to one of the manifests imported by manifests/nodes.pp

3. Make sure the server uses the nagios::client class and add a nagios_host to manifests/monitoringserver.pp

Production environment

1. Install Ubuntu Server 12.04 LTS

2. Perform an update and install Puppet

   apt-get -y update && apt-get -y upgrade && apt-get -y install puppet

3. Enable pluginsync (Add the following to the main section in /etc/puppet/puppet.conf)

   pluginsync=true

4. Configure the master address (Add the following to the bottom of /etc/puppet/puppet.conf)

   [agent] server = puppetmaster.adblockplus.org

Now you can either set it up as a pure agent or as a master. The master provides the configuration, agents fetch it from the master and apply it locally. The master is also an agent, fetching configuration from itself.

Puppet agent

1. Attempt an initial provisioning, this will fail

   puppet agent --test

2. On the master: List the certificates to get the name of the new agent's certificate

   puppet cert list

3. Still on the master: Sign the certificate, e.g. for serverx:

   puppet cert sign serverx

4. Back on the agent: Attempt another provisioning, it should work now

   puppet agent --test

Puppet master

1. Configure the certificate name (Add the following to the master section in /etc/puppet/puppet.conf)

   certname = puppetmaster.adblockplus.org

2. Install the required packages

   apt-get install puppetmaster mercurial

3. Clone the infrastructure repository

   hg clone ssh://[e-mail]/infrastructure /etc/puppet/infrastructure rmdir /etc/puppet/{modules,manifests,templates} ln -s /etc/puppet/infrastructure/manifests /etc/puppet/manifests ln -s /etc/puppet/infrastructure/modules /etc/puppet/modules

4. Make sure to put the private files in place (see above)

5. Provision the master itself

   puppet agent --test

Updating a production server

Puppet agent has to be rerun on the servers whenever their configuration is changed. The kick.py script automates and simplifies that task, e.g. the following will provision all servers (requires Puppet and PyYAML):

kick.py -u serveradmin all

Here serveradmin is your user account on the servers, it will be used to run Puppet on the servers via SSH (sudo privilege required). You can list any host groups defined in manifests/monitoringserver.pp or individual servers. You can also use -v flag to see verbose Puppet output or -t flag to do a dry run without changing anything.

Monitoring

Monitoring is fully functional in any environment, including development. Here, after bootstrapping the server4 box, one can access the Nagios GUI from the host machine via https://nagiosadmin:nagiosadmin@10.8.0.99/.

The monitoring service of our production environment, however, is accessible via https://monitoring.adblockplus.org/. Add yourself to files/nagios-htpasswd in the private module used on the server, or have someone add you if you don't have access.