fty-nut

fty-nut is a family of agents responsible for 42ITy interaction with NUT (see [http://www.networkupstools.org]) including both collection of device data and configuration of NUT to monitor new devices as assets are created.

To build, run:

mkdir build && cd build
cmake -DCMAKE_BUILD_TYPE=Debug -DCMAKE_INSTALL_PREFIX=usr -DBUILD_TESTING=On ..
make
sudo make install

Compilation of fty-nut creates two binaries fty-nut and fty-nut-configurator, which are run by systemd service.

How to run

To run fty-nut project:

from within the build/ tree, run:

./agent/fty-nut --mapping-file <path_to_mapping_file>
./agent/fty-nut --mapping-file /usr/share/fty-common-nut/mapping.conf

./fty-nut-configurator/fty-nut-configurator

from an installed base, using systemd, run:

systemctl start fty-nut
systemctl start fty-nut-configurator

Configuration file

To configure fty-nut, a two configuration files exist: fty-nut.cfg and fty-nut-configurator.cfg. Both contain standard configuration directives, under the server sections. Additional parameter

fty-nut.cfg
- polling_interval - polling interval in seconds. Default value: 30 s

Mapping file

Mapping between NUT and fty-nut is saved in:

/usr/share/fty-common-nut/mapping.conf

State File

The fty-nut-configurator state file is located in

/var/lib/fty/fty-autoconfig/state

Architecture

Overview

fty-nut is composed of three actors:

fty_nut_server - server actor
alert_actor - actor handling device alerts and thresholds coming from NUT
sensor_actor - actor handling sensor measurements coming from NUT.

fty-nut-configurator is composed of 1 actor:

fty_nut_configurator_server - server actor which configures nut-server (upsd) based on results from nut scanner

fty-nut-command is composed of 1 actor:

fty-nut-command - bridge forwarding commands from Malamute to NUT devices

Protocols

Publishing Metrics

sensor_actor produces metrics from sensors connected to power devices on FTY_PROTO_STREAM_METRICS_SENSOR and fty_shm.

stream=_METRICS_SENSOR
sender=agent-nut-sensor
subject=humidity.0@epdu-77
D: 17-11-02 12:18:16 FTY_PROTO_METRIC:
D: 17-11-02 12:18:16     aux=
D: 17-11-02 12:18:16         port=0
D: 17-11-02 12:18:16     time=1509625096
D: 17-11-02 12:18:16     ttl=60
D: 17-11-02 12:18:16     type='humidity.0'
D: 17-11-02 12:18:16     name='epdu-77'
D: 17-11-02 12:18:16     value='37.60'
D: 17-11-02 12:18:16     unit='%'

stream=_METRICS_SENSOR
sender=agent-nut-sensor
subject=status.GPI1.0@epdu-76
D: 17-11-13 15:21:57 FTY_PROTO_METRIC:
D: 17-11-13 15:21:57     aux=
D: 17-11-13 15:21:57         sname=sensorgpio-81
D: 17-11-13 15:21:57         port=0
D: 17-11-13 15:21:57         ext-port=1
D: 17-11-13 15:21:57     time=1510586517
D: 17-11-13 15:21:57     ttl=60
D: 17-11-13 15:21:57     type='status.GPI1.0'
D: 17-11-13 15:21:57     name='epdu-76'
D: 17-11-13 15:21:57     value='closed'
D: 17-11-13 15:21:57     unit=''

alerts for sensors are managed by fty-alert-engine (environmental sensors) and fty-alert-flexible (GPI sensors)

fty_nut_server produces metrics on FTY_PROTO_STREAM_METRICS and fty_shm.

stream=METRICS
sender=fty-nut
subject=status.outlet.2@ups-52
D: 17-11-13 12:53:21 FTY_PROTO_METRIC:
D: 17-11-13 12:53:21     aux=
D: 17-11-13 12:53:21     time=1510577601
D: 17-11-13 12:53:21     ttl=60
D: 17-11-13 12:53:21     type='status.outlet.2'
D: 17-11-13 12:53:21     name='ups-52'
D: 17-11-13 12:53:21     value='42'
D: 17-11-13 12:53:21     unit=''

fty-nut-command doesn't produce metrics.

Publishing Alerts

alert_actor produces metrics on FTY_PROTO_STREAM_ALERT_SYS.

stream=_ALERTS_SYS
sender=bios-nut-alert
subject=outlet.group.1.voltage@epdu-54/OKG@epdu-54
D: 17-11-13 15:05:57 FTY_PROTO_ALERT:
D: 17-11-13 15:05:57     aux=
D: 17-11-13 15:05:57     time=1510560758
D: 17-11-13 15:05:57     ttl=90
D: 17-11-13 15:05:57     rule='outlet.group.1.voltage@epdu-54'
D: 17-11-13 15:05:57     name='epdu-54'
D: 17-11-13 15:05:57     state='RESOLVED'
D: 17-11-13 15:05:57     severity='OK'
D: 17-11-13 15:05:57     description='outlet.group.1.voltage is resolved'
D: 17-11-13 15:05:57     action=''

fty-nut-command doesn't produce alerts.

Consuming Assets

fty_nut_server, sensor_actor and alert_actor listen on FTY_PROTO_STREAM_ASSETS stream.
fty-nut-command doesn't consume assets.

Mailbox Requests

fty-nut-command has a fty-common-messagebus interface for power commands.

42ity / fty-nut