Using this script you can easily rebalance individual channels of your lnd node.
This script needs an active lnd 0.9.0+ (https://github.com/lightningnetwork/lnd) instance running.
If you compile lnd yourself, you need to include the routerrpc build tag.
Example:
make tags="autopilotrpc signrpc walletrpc chainrpc invoicesrpc routerrpc"
You need to have admin rights to control this node.
By default this script connects to localhost:10009, using the macaroon file in ~/.lnd/data/chain/bitcoin/mainnet/admin.macaroon.
If you need to change this, please have a look at the optional arguments --grpc and --lnddir.
You need to install Python 3. The gRPC dependencies can be installed by running:
$ pip install -r requirements.txt
If this fails, make sure you're running Python 3.
usage: rebalance.py [-h] [--lnddir LNDDIR] [--grpc GRPC] [-r RATIO] [-l]
[-o | -i] [-f CHANNEL] [-t CHANNEL]
[-a AMOUNT | -p PERCENTAGE] [-e EXCLUDE]
[--max-fee-factor MAX_FEE_FACTOR]
optional arguments:
-h, --help show this help message and exit
--lnddir LNDDIR (default ~/.lnd) lnd directory
--grpc GRPC (default localhost:10009) lnd gRPC endpoint
-r RATIO, --ratio RATIO
(default: 50) ratio for channel imbalance between 1
and 50, eg. 45 to only show channels (-l) with less
than 45% of the funds on the local (-i) or remote (-o)
side
list candidates:
Show the unbalanced channels.
-l, --list-candidates
list candidate channels for rebalance
-o, --outgoing lists channels with less than x% of the funds on the
remote side (see --ratio)
-i, --incoming (default) lists channels with less than x% of the
funds on the local side (see --ratio)
rebalance:
Rebalance a channel. You need to specify at least the 'from' channel (-f)
or the 'to' channel (-t).
-f CHANNEL, --from CHANNEL
channel ID of the outgoing channel (funds will be
taken from this channel)You may also use the index as
shown in the incoming candidate list (-l -o), or -1 to
choose a random candidate.
-t CHANNEL, --to CHANNEL
channel ID of the incoming channel (funds will be sent
to this channel). You may also use the index as shown
in the incoming candidate list (-l -i), or -1 to
choose a random candidate.
-a AMOUNT, --amount AMOUNT
Amount of the rebalance, in satoshis. If not
specified, the amount computed for a perfect rebalance
will be used (up to the maximum of 4,294,967 satoshis)
-p PERCENTAGE, --percentage PERCENTAGE
Set the amount to send to a percentage of the amount
required to rebalance. As an example, if this is set
to 50, the amount will half of the default. See
--amount.
-e EXCLUDE, --exclude EXCLUDE
Exclude the given channel ID as the outgoing channel
(no funds will be taken out of excluded channels)
--max-fee-factor MAX_FEE_FACTOR
(default: 10) Reject routes that cost more than x
times the lnd default (base: 1 sat, rate: 1 millionth
sat) per hop on average
Run rebalance.py -l (or rebalance.py -l -i) to see a list of channels which
can be rebalanced.
This list only contains channels where less than 50% of the total funds are on
the local side of the channel.
You can also see the list of channels where less than 50% of the total funds
are on the remote side of the channel by running rebalance.py -l -o.
Use -r/--ratio to configure the sensitivity ratio (default is 50 for 50%).
As an example, rebalance.py -l -o -r 10 only shows channels where less than
10% of the total funds are on the remote side of the channel.
As an example the following indicates a channel with around 17.7% of the funds on the local side:
(23) Channel ID: 123[...]456
Pubkey: 012345[...]abcdef
Channel Point: abc0123[...]abc:0
Local ratio: 0.176
Capacity: 5,000,000
Remote balance: 4,110,320
Local balance: 883,364
Amount for 50-50: 1,613,478
|===== |
By sending 1,613,478 satoshis to yourself using this channel, a ratio of 50% can be achieved. This number is shown as "Amount for 50-50".
The last line shows a graphical representation of the channel.
The total width is determined by the channel's capacity, where a channel with maximum capacity (16,777,215 satoshis)
occupies the full width of your terminal.
The bar (=) indicates the funds on the local side of the channel.
The number next to the channel ID (23 in the example) can be used to directly reference this channel.
To actually rebalance a channel, run the script and specify the channel to send funds to (-t) or from (-f).
It is possible to use both -t and -f, but at least one of these arguments must be given.
You can also specify the amount to send (using -a).
You specify the channel(s) using the channel ID, as shown in the output of rebalance.py.
rebalance.py -t 123[...]456 -a 1613478
It is also possible to indicate the --to/-t channel by the number shown next to the channel ID (23 in the example).
rebalance.py -t 23 -a 1613478
If you do not specify the amount, the rebalance amount is determined automatically.
As an alternative to specify the amount you may also set a percentage of the rebalance amount using -p.
For example, the following command tries to sends 20% of the amount required to rebalance the channel:
rebalance.py -t 23 -p 20
The maximum amount you can send in one transaction currently is limited (by the protocol) to 4,294,967 satoshis.
Contributions are highly welcome! Feel free to submit issues and pull requests on https://github.com/C-Otto/rebalance-lnd/
Please also consider opening a channel with one of our nodes, or sending tips via keysend:
- C-Otto:
027ce055380348d7812d2ae7745701c9f93e70c1adeb2657f053f91df4f2843c71@157.90.112.145:9735 - wamde:
0269b91661812bae52280a68eec2b89d38bf26b33966441ad70aa365e120a125ff@82.36.141.97:9735