ParC-Net ECCV 2022
This reposity was named EdgeFormer, which is changed to ParC-Net, as "Former" indicates that the model is some variant of transformer.
Official PyTorch implementation of ParC-Net
Recently, vision transformers started to show impressive results which outperform large convolution based models significantly. However, in the area of small models for mobile or resource constrained devices, ConvNet still has its own advantages in both performance and model complexity. We propose ParC-Net, a pure ConvNet based backbone model that further strengthens these advantages by fusing the merits of vision transformers into ConvNets. Specifically, we propose position aware circular convolution (ParC), a light-weight convolution op which boasts a global receptive field while producing location sensitive features as in local convolutions. We combine the ParCs and squeeze-exictation ops to form a meta-former like model block, which further has the attention mechanism like transformers. The aforementioned block can be used in plug-and-play manner to replace relevant blocks in ConvNets or transformers. Experiment results show that the proposed ParC-Net achieves better performance than popular light-weight ConvNets and vision transformer based models in common vision tasks and datasets, while having fewer parameters and faster inference speed. For classification on ImageNet-1k, ParC-Net achieves 78.6% top-1 accuracy with about 5.0 million parameters, saving 11% parameters and 13% computational cost but gaining 0.2% higher accuracy and 23% faster inference speed (on ARM based Rockchip RK3288) compared with MobileViT, and uses only 0.5× parameters but gaining 2.7% accuracy compared with DeIT. On MS-COCO object detection and PASCAL VOC segmentation tasks, ParC-Net also shows better performance.
Tasks | performance | #params | pretrained models |
---|---|---|---|
Classification | 78.6 (Top1 acc) | 5.0 | model |
Detection | 28.8 (mAP) | 5.2 | model |
Segmentation | 79.7 (mIOU) | 5.8 | model |
We deploy the proposed EdgeFormer and baseline on widely used low power chip Rockchip RK3288 and DP2000 chip for comparison. DP2000 is the code name of a in house unpublished low power neural network processor that highly optimizes the convolutions. We use ONNX [1] and MNN to port these models to RK3288 and DP2000 chip and time each model for 100 iterations to measure the average inference speed.
Models | #params (M) | Madds (M) | RK3288 inference speed (ms) | DP2000 (ms) | Top1 acc |
---|---|---|---|---|---|
MobileViT-S | 5.6 | 2010 | 457 | 368 | 78.4 |
ParC-Net-S | 5.0 (-11%) | 1740 (-13%) | 353 (+23%) | 98 (3.77x) | 78.6 (+0.2%) |
Classification experiments. CPU used here is Xeon E5-2680 v4. *Authors of EdgeViT do not clarify the type of CPU used in their paper.
Models | # params | Madds | Devices | Speed(ms) | Top1 acc | Source |
---|---|---|---|---|---|---|
MobileViT-S | 5.6 M | 2.0G | RK3288 | 457 | 78.4 | ICLR 22 |
ParC-Net-S | 5.0 M | 1.7G | RK3288 | 353 | 78.6 | Ours |
MobileViT-S | 5.6 M | 2.0G | DP2000 | 368 | 78.4 | ICLR 22 |
ParC-Net-S | 5.0 M | 1.7G | DP2000 | 98 | 78.6 | Ours |
ResNet50 | 26 M | 2.1G | CPU | 98 | 78.8 | CVPR 16 |
ParC-ResNet50 | 24 M | 2.0G | CPU | 98 | 79.6 | Ours |
MobileNetV2 | 3.5 M | 0.3G | CPU | 24 | 70.2 | CVPR 18 |
ParC-MobileNetV2 | 3.5 M | 0.3G | CPU | 27 | 71.1 | Ours |
ConvNext-XT | 7.4 M | 0.6G | CPU | 47 | 77.5 | CVPR 22 |
ParC-ConvNext-XT | 7.4 M | 0.6G | CPU | 48 | 78.3 | Ours |
EdgeViT-XS | 6.7 M | 1.1G | CPU* | 54* | 77.5 | Arxiv 22/05 |
ParC-EdgeViT-XS |
Detection experiments
Models | # params | AP box | AP50 box | AP75 box | AP mask | AP50 mask | AP75 mask |
---|---|---|---|---|---|---|---|
ConvNext-XT | - | 47.2 | 65.6 | 51.4 | 41.0 | 63.0 | 44.2 |
ParC-ConvNext-XT | - | 47.7 | 66.2 | 52.0 | 41.5 | 63.6 | 44.6 |
Segmentation experiments
To be done
ConvNext block and ConvNext-GCC block
In terms of designing a pure ConvNet via learning from ViTs, our proposed ParC-Net is most closely related to a parallel work ConvNext. By comparing ParC-Net with Convnext, we notice that their improvements are different and complementary. To verify this point, we build a combination network, where ParC blocks are used to replace several ConvNext blocks in the end of last two stages. Experiment results show that the replacement signifcantly improves classification accuracy, while slightly decreases the number of parameters. Results on ResNet50, MobileNetV2 and ConvNext-T shows that models which focus on optimizing FLOPs-accuracy trade-offs can also benefit from our ParC-Net designs. Corresponding code will be released soon.
We implement the ParC-Net with PyTorch-1.9.0, CUDA=11.1.
The environment can be build in the local python environment using the below command:
pip install -r requirements.txt
A docker image containing the environment will be provided soon.
Training settings are listed in yaml files (./config/classification/xxx/xxxx.yaml, ./config/detection/xxx/xxxx.yaml, ./config/segmentation/xxx/xxxx.yaml )
Classifiction
cd EdgeFormer-main
CUDA_VISIBLE_DEVICES=0,1,2,3,4,5,6,7 python main_train.py --common.config-file ./config/classification/edgeformer/edgeformer_s.yaml
Detection
cd EdgeFormer-main
CUDA_VISIBLE_DEVICES=0,1,2,3 python main_train.py --common.config-file --common.config-file config/detection/ssd_edgeformer_s.yaml
Segmentation
cd EdgeFormer-main
CUDA_VISIBLE_DEVICES=0,1,2,3 python main_train.py --common.config-file --common.config-file config/segmentation/deeplabv3_edgeformer_s.yaml
Classifiction
cd EdgeFormer-main
CUDA_VISIBLE_DEVICES=0 python eval_cls.py --common.config-file ./config/classification/edgeformer/edgeformer_s.yaml --model.classification.pretrained ./pretrained_models/classification/checkpoint_ema_avg.pt
Detection
cd EdgeFormer-main
CUDA_VISIBLE_DEVICES=0 python eval_det.py --common.config-file ./config/detection/edgeformer/ssd_edgeformer_s.yaml --model.detection.pretrained ./pretrained_models/detection/checkpoint_ema_avg.pt --evaluation.detection.mode validation_set --evaluation.detection.resize-input-images
Segmentation
cd EdgeFormer-main
CUDA_VISIBLE_DEVICES=0 python eval_seg.py --common.config-file ./config/detection/edgeformer/deeplabv3_edgeformer_s.yaml --model.segmentation.pretrained ./pretrained_models/segmentation/checkpoint_ema_avg.pt --evaluation.segmentation.mode validation_set --evaluation.segmentation.resize-input-images
We thank authors of MobileVit for sharing their code. We implement our EdgeFormer based on their source code. If you find this code is helpful in your research, please consider citing our paper and MobileVit
@inproceedings{zhang2022parcnet,
title={ParC-Net: Position Aware Circular Convolution with Merits from ConvNets and Transformer},
author={Zhang, Haokui and Hu, Wenze and Wang, Xiaoyu},
booktitle={European Conference on Computer Vision},
pages={},
year={2022}
}
@inproceedings{mehta2021mobilevit,
title={Mobilevit: light-weight, general-purpose, and mobile-friendly vision transformer},
author={Mehta, Sachin and Rastegari, Mohammad},
journal={ICLR},
year={2022}
}