original linux version using "linux" branch, windows version use "windows" branch
Freescale/NXP I.MX Chip image deploy tools.
uuu (universal update utility) for nxp imx chips -- libuuu-1.0.1-gffd9837
Succues:0 Failure:3 Wait for Known USB Device Appear...
1:11 5/5 [ ] SDP: jump -f u-boot-dtb.imx -ivtinitramf....
2:1 1/5 [===> ] SDP: boot -f u-boot-imx7dsabresd_sd.imx ....
under development
- The real cross platform. linux, windows, MacOS(not test yet)
- Multi devices program support
- Daemon mode support.
- Small depedence (only libusb and zlibc)
- Firmware (uboot/kernel) use WCID to auto load winusb drvier in windows side. win7 user need install winusb driver. https://zadig.akeo.ie/ win10 will install driver automatically.
uuu u-boot.imx Download u-boot.imx by HID device
uuu list.uu Run all commands in list.uu
uuu -s Enter shell mode. input command.
uuu -v u-boot.imx verbose mode
uuu -d u-boot.imx Once detect known device attach, download boot.imx.
u-boot.imx can be replaced, new file will be download once board reset.
Avoid unplug sd, write sd, plug sd card when debug uboot.
uuu -b emmc u-boot.imx write u-boot.imx to emmc boot partition. u-boot.imx need enable fastboot
- git clone https://github.com/NXPmicro/mfgtools.git
- cd mfgtools
- git submodule init
- git submodule update
- open msvs/uuu.sln by vs2017
- git clone https://github.com/NXPmicro/mfgtools.git
- cd mfgtools
- sudo apt-get install libusb-1.0.0-dev libzip-dev
- cmake .
- make