DEDSEC_WIFUCK is a sophisticated Wifi jamming device/tool that uses an ESP32 NodeMCU and an nRF module. This tool can effectively disrupt wifi communication, causing a Denial of Service (DoS) attack on various wifi devices such as smartphones, IoT devices, and more. By jamming wifi frequencies, DEDSEC_WIFUCK renders targeted devices non-functional.
ESP32-devkit v1 nodeMCU
2x nRF24L01
2x 10UF 16v Capacitor
Data usb cable
1. git clone https://github.com/0xbitx/DEDSEC_WIFUCK.git
2. cd DEDSEC_WIFUCK
3. pip install esptool
4. ./esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 115200 write_flash 0x0 dedsec_wifuck.hex
Below are the pinout mappings from the ESP32 to the nRF24L01+ modules for both HSPI and VSPI configurations.
| 1st nRF24L01 module Pin | HSPI Pin (ESP32 devkit v1) | 10uf 16v capacitor |
|---|---|---|
| VCC | 3.3V | (+) capacitor |
| GND | GND | (-) capacitor |
| CE | GPIO 16 | |
| CSN | GPIO 15 | |
| SCK | GPIO 14 | |
| MOSI | GPIO 13 | |
| MISO | GPIO 12 | |
| IRQ | Not Connected |
| 2nd nRF24L01 module Pin | VSPI Pin (ESP32 devkit v1) | 10uf 16v capacitor |
|---|---|---|
| VCC | 3.3V | (+) capacitor |
| GND | GND | (-) capacitor |
| CE | GPIO 22 | |
| CSN | GPIO 21 | |
| SCK | GPIO 18 | |
| MOSI | GPIO 23 | |
| MISO | GPIO 19 | |
| IRQ | Not Connected |
If you find my work helpful and want to support me, consider making a donation. Your contribution will help me continue working on open-source projects.
Bitcoin Address: 36ALguYpTgFF3RztL4h2uFb3cRMzQALAcm