01Space's repositories
ESP32-S3_CO2_Monitor
This is the wall charger mount version
ChameleonUltra
The new generation chameleon based on NRF52840 makes the performance of card emulation more stable. And gave the chameleon the ability to read, write, and decrypt cards.
hx_espnow_rc
Remote control library based on ESP-NOW (PlatformIO, ESP32 and ESP8266)
antenna-tracker
A PCB based off of SpeedyBeeF405WING(https://www.speedybee.com/speedybee-f405-wing-app-fixed-wing-flight-controller/) able to run Ardupilot's Antennah Tarcker firmware(https://ardupilot.org/antennatracker/)
ESCape32
BLDC motor control firmware for 32-bit ESCs
ESP32-e-Paper-Weather-Display
An ESP32 and 2.9", 4.2" or 7.5" ePaper Display reads Weather Underground data via their API and then displays the weather
ESP32-Tuya_Device
Replace Tuya device wifi module with ESP32-C3
esp32-weather-epd
A low-power E-Paper weather display powered by an ESP32 microcontroller. Utilizes the OpenWeatherMap API.
ESP32_SpecificGravity
Calculates fermentation Specific Gravity from tilt angle of floating sensor
EspCopter32
Qaudcopter code for ESP32
ExpressLRS-Nano-Receiver
ExpressLRS Nano Receiver
Flipper
Playground (and dump) of stuff I make or modify for the Flipper Zero
flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!
FlopperZiro
An orribol copi of FilipperZero, with worst inglish
foxbms-2
foxBMS 2, online documentation at https://docs.foxbms.org
moteus
Brushless servo and quadrupedal robot
NoahFC
NoahFC - Atmega328 based Flight Controller
plainFlightController
Flight stabilisation software
RX5808-Div
自制的RX5808接收机
SlimeVR-Candy
Custom SlimeVR Trackers I am working on, PCB and Case design, optimized for being compact while using breakout boards and also have cable routing in mind so it won't affect the antenna signal. 3D files are designed in Fusion 360 as that is what I have the most experience with.
SlimeX-FDM
An easy to print, clean and very compact case design for SlimeVR.
TFSLOT01
Low speed IAS Airspeed sensor for UAVs
tillitis-key1
Board designs, FPGA verilog, firmware for TKey, the flexible and open USB security key 🔑
TinyWatchy
Alternative, energy saving focused, Watchy firmware that's really tiny and simplistic yet powerful
willpower
Raspberry Pico Flight Controller for fixed wing aircraft
Willy_Firmware_CC1101_ESP32_Display_Touchscreen
Willy Firmware is an alternative to Flipper Zero. | Board: ESP32 T-Display-S3 - Module: CC1101 - Display: Touchscreen - Compatible Flipper Zero file.