zk4 / git-sync

Safe and simple one-script git synchronization

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

git-sync-plus

Support submodule sync

Synchronize tracking repositories.

This scrips intends to sync near-automatically via git in "tracking" repositories where a nice history is not as crucial as having one.

2012-2022 by Simon Thum and contributors, licensed under CC0

Use case

Suppose you have a set of text files you care about, multiple machines to work on, and a central git repository (a.k.a. bare reporitory) at your disposal. You do not care about atomic commits, but coarse versioning and backup is grave. For example, server configuration or org-mode files.

In that case, git-sync will help you keep things in sync.

Unlike the myriad of scripts to do just that already available, it follows the KISS principle: It is safe, small, requires nothing but git and bash, but does not even try to shield you from git. It is non-interactive, but will cautiously exit with a useful hint or error if there is any kind of problem.

It is ultimately intended for git-savvy people. As a rule of thumb, if you know how to complete a failed rebase, you're fine.

To synchronize automatically on filesystem changes, have a look at the contrib directory. Alternatively, here is an older blog about automatic git-sync operation:

Automated Syncing with Git

Tested on msysgit and a real bash. In case you know bash scripting, it will probably make your eyes bleed, but for some reason it works.

What does git-sync do?

git-sync will likely get from you from a dull normal git repo with some changes to an updated dull normal git repo equal to origin. It does this by commiting, pulling & pushing as appropriate.

Care has been taken that any kind of problem, pre-existing or not, results in clear error messages and non-zero return code, but of course no guarantee can be given.

The intent is to do everything that's needed to sync automatically, and resort to manual intervention as soon as something non-trivial occurs. It is designed to be safe in that git-sync will likely refuse to do anything not known to be safe.

You can invoke git-sync in "check" mode, in which git-sync will not do anything except return zero if syncing may start, and non-zero if manual intervention is required.

How am I supposed to use it?

git-sync [mode]

Mode can be empty, sync, or check.

In "check" mode, git-sync will indicate if synchronization may start. This is useful to see if manual intervention is required (indicated by text and non-zero exit code).

In sync mode (the default), just calling git-sync inside your repository will sync with the current branches remote, if that branch is enlisted. The repository must not be in the middle of a rebase, git-am, merge or whatever, not detached, and untracked files may also be treated as an obstacle (see Options). However, sync is likely to just work. Else, a clear error message should appear.

If you don't sync in an intertwined manner (from multiple repositories/machines), git-sync is virtually guaranteed to succeed. When required git-sync will try to rebase, which may fail. This is when you'll need your git skills.

How does it work?

The flow is roughly:

  1. sanity checks. You don't want to do this in the middle of a rebase.
  2. Check for new files; exit if there are, unless allowed (see Options). In check mode, exit with 0 at this point.
  3. Check for auto-commitable changes.
  4. perform auto-commit if there are (see Options)
  5. one more check for leftover changes / general tidyness
  6. fetch upstream
  7. Relate upstream to ours. If ahead, push. If behind, fast-forward. If diverged, rebase, then push.
  8. At exit, assert sync state once more just to be safe.

On the first invocation, git-sync will ask you to enlist the current branch for sync using git config. This has to be done once for every repository (and branch, for completeness).

Because git-sync rebases, the order of commits does not always reflect the order of changes. However auto-commit records the originating machine name and time by default.

Options

There are three git config-based options for tailoring your sync:

branch.$branch_name.syncNewFiles (bool)

Tells git-sync to invoke auto-commit even if new (untracked) files are present. Normally you have to commit those yourself to prevent accidential additions. git-sync will exit at stage 3 with an explanation in that case.

branch.$branch_name.syncCommitMsg (string)

A string which will be used in place of the default commit message (as shown below).

branch.$branch_name.autocommitscript (string)

A string which is being eval'ed by this script to perform an auto-commit. Here you can run a commit script which should not leave any uncommited state. The default will commit modified or all files with a more or less useful message.

By default, commit is done using:

git add -u ; git commit -m "changes from $(uname -n) on $(date)"

Or if you enable syncNewFiles:

git add -A ; git commit -m \"changes from $(uname -n) on $(date)\";"

Command-line flags

There are also some command-line flags you can set to control the sync:

-n is the equivalent of branch.$branch_name.syncNewFiles, adding new files even if the matching git config option is not set.

-s is the equivalent of branch.$branch_name.sync, allowing syncing a branch even if the matching git config option is not set.

contrib contents

git-sync-on-inotify

Automatically synchronize your git repository whenever a file is touched.

git-sync-on-inotify uses the functionality of git-sync together with an inotifywait to automatically synchronize local changes you have made to your files as soon as they happen. inotifywait waits for events from the operating system which are triggered by any edits you make to files in the git repository. This means that updates are near instantaneous, without the need to resort to polling. git-sync-on-inotify still does a polling call to git-sync to ensure that changes from the upstream do make it in. This polling interval is configurable with the environment variable GIT_SYNC_INTERVAL.

By design, this solution may miss changes until the next GIT_SYNC_INTERVAL time.

modd.conf

Automatically sync upon local filesystem changes using modd.

https://github.com/cortesi/modd

This is a more robust solution to sync on local chances, but will not poll upstream except on startup. If you manage not to interleave sessions, that's fine.

License

I declare this work to be useable under the provisions of the CC0 license.

http://creativecommons.org/publicdomain/zero/1.0/

Attribution is appreciated, but not required.

Thanks

Thanks go to all the people behind git.

About

Safe and simple one-script git synchronization


Languages

Language:Shell 100.0%