QFN-12 to SOIC8 replace

[vakuliniv]

Dear author, in your project "Legacy_stepper_motor_analyser" you used current sensors ACS70331EESATR-2P5B3 (x2 QFN-12 chip ). Can you make light redesign of the board and add place for SOIC-8 version of current sensors (ACS70331EOLCTR-2P5B3), or fully change places ( x2 QFN-12 to x2 SOIC-8)? This is problem for me to find sensor in QFN-12 chip with adequate price :( The SOIC-8 version is widely presented in available stores. I'm sorry, but I haven't enough time to deal with Kicad now :(. Alas, migrate to Raspbery PI is not acceptable variant too. Best regards

[Zapta]

Hello vakuliniv, Have you looked at the new design? It uses a different package of the same IC. https://github.com/zapta/simple_stepper_motor_analyzer

…

On Wed, Nov 3, 2021 at 1:46 PM vakuliniv ***@***.***> wrote: Dear author, in your project "Legacy_stepper_motor_analyser" you used current sensors ACS70331EESATR-2P5B3 (x2 QFN-12 chip ). Can you make light redesign of the board and add place for SOIC-8 version of current sensors (ACS70331EOLCTR-2P5B3), or fully change places ( x2 QFN-12 to x2 SOIC-8)? This is problem for me to find sensor in QFN-12 chip with adequate price :( The SOIC-8 version is widely presented in available stores. I'm sorry, but I haven't enough time to deal with Kicad now :(. Alas, migrate to Raspbery PI is not acceptable variant too. Best regards — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#11>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAQVMQMRTYMBR4KJCI4E6M3UKGNQ5ANCNFSM5HJ4Y63A> . Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>.

[vakuliniv]

Hello, zapta.
Yes, I saw your new design :) But it was designed for Raspbery Pi :( This is not entirely convenient for me ... I would like to use exactly STM32 version by some reasons. Therefore, my request remains valid. I hope, it will be easy for you to made this changes.

[Zapta]

Hi vakuliniv, sorry but I don't have an SOIC version of the legacy design and I don't maintain it any more (that's why I renamed to 'legacy').

…

On Thu, Nov 4, 2021 at 2:26 PM vakuliniv ***@***.***> wrote: Hello, zapta. Yes, I saw your new design :) But it was designed for Raspbery Pi :( This is not entirely convenient for me ... I would like to use exactly STM32 version by some reasons. Therefore, my request remains valid. I hope, it will be easy for you to made this changes. — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#11 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAQVMQJFUCB7VJ24S7LCRILUKL27FANCNFSM5HJ4Y63A> . Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>.

[vakuliniv]

Hello, zapta. I had to master the basics of the KiCad and make changes to the design myself. Now legacy project has board with SOIC-8 footprint. Are you need this version?

[Zapta]

Hi vakuliniv, thanks for the offer. I prefer not to touch the legacy version and focus on the new design because it's based on the Raspberry Pico (a superior MCU) and a less expensive bare TFT that also allows a more compact case. Good luck with the project. It's a lot of fun.

…

On Sun, Nov 7, 2021 at 10:46 AM vakuliniv ***@***.***> wrote: Hello, zapta. I had to master the basics of the KiCad and make changes to the design myself. Now legacy project has board with SOIC-8 footprint. Are you need this version? — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#11 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAQVMQIPV6L7ZEQPPD2Y3IDUK3CPDANCNFSM5HJ4Y63A> . Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>.