Submission for Project 2 of the Udacity Robotics Software Engineer Nanodegree Program. This repository contains a robot that has the following features:
- Chase a solid colored ball if it is within camera view.
- If it is chasing a ball and it goes out of camera view, seek the ball by turning approximately 360 degrees then give up until a new ball is seen.
Make sure you have gazebo and rviz installed and you have setup a catkin workspace
Clone the repo to your catkin workspace's src folder
eg:
git clone https://github.com/xilef/robond_project2 /home/robond/workspace/catkin_ws/src
Go to the root of your catkin workspace and run catkin_make to build the whole repo
When you open a new terminal make sure to run first source devel/setup.bash from the root of your catkin workspace.
Once all the setup is done run:
roslaunch my_robot world.launch
to load the world.
Open a new terminal, navigate to your catkin workspace and run:
roslaunch ball_chaser ball_chaser.launch
to run the ball chasing service
The content in this repository is free to use.