WiFi and TFT simultaneous
fritzbaratto opened this issue · comments
Why doesn't work WiFi and TFT at the same time in my CYD?
You'll have to give more info because it does for me
Hi Brian,
I just wanted try to implement a my project, realized last year using a
ESP32 DevKit board and a separate 2.8TFT Lcd, seen the high integration of
the CYD.
I cropped the old Arduino sketch, keeping the only parts useful for this
test.
I see that, as soon as the instruction "WiFi.begin(ssid, password)" is
sent, the TFT visualization freezes, even if all other activities are
running.
I've read that use of GPIO2 (ADC2) is to avoid when WiFi is on, but the
hardware of CYD utilizes IO2 as RS signal of TFT...could it be the case?
Thanks for the attention,
Fritz
Il gio 30 nov 2023, 12:41 Brian Lough ***@***.***> ha scritto:
… You'll have to give more info because it does for me
—
Reply to this email directly, view it on GitHub
<#77 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/APUN7WXKRGMXVH2SWA3RHBLYHBWGTAVCNFSM6AAAAABABAHZZCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMZTGYYDENZRHA>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
cut the .pdf extension
…On Thu, Nov 30, 2023 at 12:41 PM Brian Lough ***@***.***> wrote:
You'll have to give more info because it does for me
—
Reply to this email directly, view it on GitHub
<#77 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/APUN7WXKRGMXVH2SWA3RHBLYHBWGTAVCNFSM6AAAAABABAHZZCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMZTGYYDENZRHA>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
Hi Brian, IT WORKS,!
I had a wrong board selected in Arduino IDE...
sorry,
Fritz
Great!