There are 4 repositories under esphome-component topic.
ESPHome component to monitor and control a Jikong Battery Management System (JK-BMS) via UART-TTL or BLE
Victron Mppt charger ve.direct to esphome node
A simple DIY status display with a 8x32 RGB LED matrix, implemented with esphome.io and Home Assistant.
A collection of my ESPHome components
Stream server (serial-to-wifi bridge) for ESPHome
ESPHome components
Use official Victron BLE endpoint for fetching data from Victron devices via Bluetooth LE via ESPHome.
ESPHome component for NSPanel Lovelace UI
Room presence detection using mmWave radar (DFRobot SEN0395), D1 Mini ESP-8266 and ESPHome for HomeAssistant
ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE
ESPHome BLE Keyboard
ESPHome Custom Component for Sonoff TX Ultimate
ESPHome component to monitor and control a pipsolar inverter via RS232
ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter
SmartShunt ve.direct to ESPHOME node
esphome-econet is a package for controlling a Rheem water heater or HVAC system with an esp32 or esp8266 micro-computer.
Create your own smart modulating thermostat using the OpenTherm component for ESPHome
ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART or RS485
Collection of code, tools and documentation for data retrieval over BLE from your Powerpal
ESPHome component to monitor and control some Atorch meters via bluetooth
ESPHome component to monitor and control a ANT-BMS via UART
This package implements ESPHome components to low-code support Bluetooth Low Eneregy BTHome device standalone reception, and a leverage this protocol over ad-hoc routerless WiFi transmission over ESP-NOW channel.
esphome external component to support meters with OBIS D0 interface
ESPHome component to monitor a Solax X1 mini via RS485
ESPHome component to remote control Truma CP Plus Heater
ESPHome integration for mmWave Sensors from Seeed Studio
Collection of code, tools and documentation for data retrieval from your Emerald Electricity Advisor (all reverse engineered)
ESPHome component to monitor and control a APC UPS via RS232
Control Electrolux Water Heater via uart
Guide to convert arduino code to ESPHome component with inputs controlled by Home Assistant.
esphome custom component for IKEA's LED matrix Frekvens & Obegränsad
ESPHome component to monitor and control a PACE Battery Management System (PACE-BMS) via RS485 (Modbus)
A collection of external components for esp-home