There are 0 repository under cubecell topic.
Heltec CubeCell Series (based on ASR6501, ASR6502 chip) Arduino support.
Small repeater node for the meshtastic project.
ASR Microelectronics ASR650x: development platform for PlatformIO
PCB design of breakout board for Ebyte E78 (ASR6501 or ASR6601) module
Estación metereológica DIY con comunicaciones LoRaWAN TTN
LoRa APRS Tracker for Heltec Cubecell GPS Boards
It's an IoT DIY project which notifies you when you have received a parcel or a letter in your letterbox. This project uses an HelTec AB01 LoRaWAN module to send data over an LoRaWAN Gateway when WiFi is out of range. I use an Helium Gateway from the People's Network in order to forward packets over Helium Network which send data to AWS IoT Core (MQTT) or Pipedream (HTTP) and more. LoRaWAN is a bidirectional protocol useful when you need to send few data over long distance from low-power and low-bandwidth IoT.
This DIY project is a LoRaWAN Rain Gauge based on CubeCell HTCC AB01 development Board.
A physical mailbox that sends you a message via LoRaWAN once you receive a letter.
LoRa mini air quality drone onboard station
presentation, report and code for module sensor networks of HTW Dresden (I771)
Project III- Univalle 2023 LoRa-IoT platform
This page includes all information and codes to developp both a simple datalogger or a more complex LoRaWAN weather station based on a low-cost arduino-based approach