The description "standard C11" does not seem to be correct
sarubo opened this issue · comments
The README says standard C11, so I run the following:
cc -c neco.c -std=c11
I see a lot of errors.
Error
neco.c: In function ‘worker_entry’:
neco.c:2770:9: error: implicit declaration of function ‘clock_gettime’ [-Wimplicit-function-declaration]
2770 | clock_gettime(CLOCK_REALTIME, &ts);
| ^~~~~~~~~~~~~
neco.c:2770:23: error: ‘CLOCK_REALTIME’ undeclared (first use in this function)
2770 | clock_gettime(CLOCK_REALTIME, &ts);
| ^~~~~~~~~~~~~~
neco.c:2770:23: note: each undeclared identifier is reported only once for each function it appears in
In file included from neco.c:2868:
neco.h: At top level:
neco.h:175:18: warning: ‘struct addrinfo’ declared inside parameter list will not be visible outside of this definition or declaration
175 | const struct addrinfo *hints, struct addrinfo **res);
| ^~~~~~~~
neco.h:177:18: warning: ‘struct addrinfo’ declared inside parameter list will not be visible outside of this definition or declaration
177 | const struct addrinfo *hints, struct addrinfo **res, int64_t deadline);
| ^~~~~~~~
neco.c: In function ‘strsignal0’:
neco.c:2933:16: error: implicit declaration of function ‘strsignal’; did you mean ‘strsignal0’? [-Wimplicit-function-declaration]
2933 | return strsignal(signo);
| ^~~~~~~~~
| strsignal0
neco.c:2933:16: error: returning ‘int’ from a function with return type ‘const char *’ makes pointer from integer without a cast [-Wint-conversion]
2933 | return strsignal(signo);
| ^~~~~~~~~~~~~~~~
neco.c: In function ‘system_out’:
neco.c:2999:16: error: implicit declaration of function ‘popen’; did you mean ‘open’? [-Wimplicit-function-declaration]
2999 | FILE *ls = popen(command, "r");
| ^~~~~
| open
neco.c:2999:16: error: initialization of ‘FILE *’ from ‘int’ makes pointer from integer without a cast [-Wint-conversion]
neco.c:3011:13: error: implicit declaration of function ‘pclose’; did you mean ‘close’? [-Wimplicit-function-declaration]
3011 | pclose(ls);
| ^~~~~~
| close
neco.c: In function ‘getnow’:
neco.c:3240:19: error: ‘CLOCK_MONOTONIC’ undeclared (first use in this function)
3240 | clock_gettime(CLOCK_MONOTONIC, &now);
| ^~~~~~~~~~~~~~~
neco.c: At top level:
neco.c:3610:22: error: array type has incomplete element type ‘struct sigaction’
3610 | struct sigaction sigold[32]; // previous signal handlers, for restoring
| ^~~~~~
neco.c: In function ‘is_main_thread’:
neco.c:3692:31: error: implicit declaration of function ‘syscall’ [-Wimplicit-function-declaration]
3692 | return getpid() == (pid_t)syscall(SYS_gettid);
| ^~~~~~~
neco.c: At top level:
neco.c:3953:35: error: unknown type name ‘siginfo_t’
3953 | static void sighandler(int signo, siginfo_t *info, void *ptr) {
| ^~~~~~~~~
neco.c: In function ‘rt_handle_signals’:
neco.c:3984:19: error: variable ‘act’ has initializer but incomplete type
3984 | static struct sigaction act = { 0 };
| ^~~~~~~~~
neco.c:3984:37: warning: excess elements in struct initializer
3984 | static struct sigaction act = { 0 };
| ^
neco.c:3984:37: note: (near initialization for ‘act’)
neco.c:3984:29: error: storage size of ‘act’ isn’t known
3984 | static struct sigaction act = { 0 };
| ^~~
neco.c:3985:5: error: implicit declaration of function ‘sigemptyset’ [-Wimplicit-function-declaration]
3985 | sigemptyset(&act.sa_mask);
| ^~~~~~~~~~~
neco.c:3986:25: error: ‘sighandler’ undeclared (first use in this function); did you mean ‘sigallowhandler’?
3986 | act.sa_sigaction = &sighandler;
| ^~~~~~~~~~
| sigallowhandler
neco.c:3987:20: error: ‘SA_SIGINFO’ undeclared (first use in this function)
3987 | act.sa_flags = SA_SIGINFO;
| ^~~~~~~~~~
neco.c:3993:21: error: ‘SA_ONSTACK’ undeclared (first use in this function)
3993 | act.sa_flags |= SA_ONSTACK;
| ^~~~~~~~~~
neco.c:3994:5: error: unknown type name ‘stack_t’
3994 | stack_t ss = {
| ^~~~~~~
neco.c:3995:9: error: field name not in record or union initializer
3995 | .ss_sp = rt->sigstack,
| ^
neco.c:3995:9: note: (near initialization for ‘ss’)
neco.c:3995:18: error: initialization of ‘int’ from ‘char *’ makes integer from pointer without a cast [-Wint-conversion]
3995 | .ss_sp = rt->sigstack,
| ^~
neco.c:3995:18: note: (near initialization for ‘ss’)
neco.c:3996:9: error: field name not in record or union initializer
3996 | .ss_size = NECO_SIGSTKSZ,
| ^
neco.c:3996:9: note: (near initialization for ‘ss’)
neco.c:54:27: warning: excess elements in scalar initializer
54 | #define DEF_SIGSTKSZ 1048576
| ^~~~~~~
neco.c:80:23: note: in expansion of macro ‘DEF_SIGSTKSZ’
80 | #define NECO_SIGSTKSZ DEF_SIGSTKSZ
| ^~~~~~~~~~~~
neco.c:3996:20: note: in expansion of macro ‘NECO_SIGSTKSZ’
3996 | .ss_size = NECO_SIGSTKSZ,
| ^~~~~~~~~~~~~
neco.c:54:27: note: (near initialization for ‘ss’)
54 | #define DEF_SIGSTKSZ 1048576
| ^~~~~~~
neco.c:80:23: note: in expansion of macro ‘DEF_SIGSTKSZ’
80 | #define NECO_SIGSTKSZ DEF_SIGSTKSZ
| ^~~~~~~~~~~~
neco.c:3996:20: note: in expansion of macro ‘NECO_SIGSTKSZ’
3996 | .ss_size = NECO_SIGSTKSZ,
| ^~~~~~~~~~~~~
neco.c:3997:9: error: field name not in record or union initializer
3997 | .ss_flags = 0,
| ^
neco.c:3997:9: note: (near initialization for ‘ss’)
neco.c:3997:21: warning: excess elements in scalar initializer
3997 | .ss_flags = 0,
| ^
neco.c:3997:21: note: (near initialization for ‘ss’)
neco.c:3999:10: error: implicit declaration of function ‘sigaltstack’; did you mean ‘SYS_sigaltstack’? [-Wimplicit-function-declaration]
3999 | must(sigaltstack(&ss, NULL) == 0);
| ^~~~~~~~~~~
neco.c:2967:11: note: in definition of macro ‘must’
2967 | if (!(cond)) { \
| ^~~~
neco.c:4003:14: error: implicit declaration of function ‘sigaction’ [-Wimplicit-function-declaration]
4003 | must(sigaction(signo, &act, &rt->sigold[signo]) == 0);
| ^~~~~~~~~
neco.c:2967:11: note: in definition of macro ‘must’
2967 | if (!(cond)) { \
| ^~~~
neco.c: In function ‘rt_sched_paused_step’:
neco.c:4212:9: error: implicit declaration of function ‘nanosleep’; did you mean ‘nanosleep0’? [-Wimplicit-function-declaration]
4212 | nanosleep(&(struct timespec){
| ^~~~~~~~~
| nanosleep0
neco.c: In function ‘neco_strerror’:
neco.c:5642:20: error: implicit declaration of function ‘gai_strerror’; did you mean ‘neco_strerror’? [-Wimplicit-function-declaration]
5642 | return gai_strerror(neco_gai_errno);
| ^~~~~~~~~~~~
| neco_strerror
neco.c:5642:20: error: returning ‘int’ from a function with return type ‘const char *’ makes pointer from integer without a cast [-Wint-conversion]
5642 | return gai_strerror(neco_gai_errno);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
neco.c: In function ‘gai_args_free’:
neco.c:6486:9: error: implicit declaration of function ‘freeaddrinfo’ [-Wimplicit-function-declaration]
6486 | freeaddrinfo(args->res);
| ^~~~~~~~~~~~
neco.c: In function ‘gai_args_new’:
neco.c:6529:38: error: invalid application of ‘sizeof’ to incomplete type ‘struct addrinfo’
6529 | args->hints = malloc0(sizeof(struct addrinfo));
| ^~~~~~
neco.c:6534:39: error: invalid application of ‘sizeof’ to incomplete type ‘struct addrinfo’
6534 | memset(args->hints, 0, sizeof(struct addrinfo));
| ^~~~~~
neco.c:6535:20: error: invalid use of undefined type ‘struct addrinfo’
6535 | args->hints->ai_flags = hints->ai_flags;
| ^~
neco.c:6535:38: error: invalid use of undefined type ‘const struct addrinfo’
6535 | args->hints->ai_flags = hints->ai_flags;
| ^~
neco.c:6536:20: error: invalid use of undefined type ‘struct addrinfo’
6536 | args->hints->ai_family = hints->ai_family;
| ^~
neco.c:6536:39: error: invalid use of undefined type ‘const struct addrinfo’
6536 | args->hints->ai_family = hints->ai_family;
| ^~
neco.c:6537:20: error: invalid use of undefined type ‘struct addrinfo’
6537 | args->hints->ai_socktype = hints->ai_socktype;
| ^~
neco.c:6537:41: error: invalid use of undefined type ‘const struct addrinfo’
6537 | args->hints->ai_socktype = hints->ai_socktype;
| ^~
neco.c:6538:20: error: invalid use of undefined type ‘struct addrinfo’
6538 | args->hints->ai_protocol = hints->ai_protocol;
| ^~
neco.c:6538:41: error: invalid use of undefined type ‘const struct addrinfo’
6538 | args->hints->ai_protocol = hints->ai_protocol;
| ^~
neco.c:6539:20: error: invalid use of undefined type ‘struct addrinfo’
6539 | args->hints->ai_next = NULL;
| ^~
neco.c: In function ‘getaddrinfo_th’:
neco.c:6554:14: error: implicit declaration of function ‘getaddrinfo’; did you mean ‘getaddrinfo_th’? [-Wimplicit-function-declaration]
6554 | a->ret = getaddrinfo(a->node, a->service, a->hints, &a->res);
| ^~~~~~~~~~~
| getaddrinfo_th
neco.c: In function ‘getaddrinfo_dl’:
neco.c:6615:16: error: ‘EAI_MEMORY’ undeclared (first use in this function)
6615 | return EAI_MEMORY;
| ^~~~~~~~~~
neco.c: At top level:
neco.c:6684:5: error: conflicting types for ‘neco_getaddrinfo_dl’; have ‘int(const char *, const char *, const struct addrinfo *, struct addrinfo **, int64_t)’ {aka ‘int(const char *, const char *, const struct addrinfo *, struct addrinfo **, long int)’}
6684 | int neco_getaddrinfo_dl(const char *node, const char *service,
| ^~~~~~~~~~~~~~~~~~~
neco.h:176:5: note: previous declaration of ‘neco_getaddrinfo_dl’ with type ‘int(const char *, const char *, const struct addrinfo *, struct addrinfo **, int64_t)’ {aka ‘int(const char *, const char *, const struct addrinfo *, struct addrinfo **, long int)’}
176 | int neco_getaddrinfo_dl(const char *node, const char *service,
| ^~~~~~~~~~~~~~~~~~~
neco.c:6711:5: error: conflicting types for ‘neco_getaddrinfo’; have ‘int(const char *, const char *, const struct addrinfo *, struct addrinfo **)’
6711 | int neco_getaddrinfo(const char *node, const char *service,
| ^~~~~~~~~~~~~~~~
neco.h:174:5: note: previous declaration of ‘neco_getaddrinfo’ with type ‘int(const char *, const char *, const struct addrinfo *, struct addrinfo **)’
174 | int neco_getaddrinfo(const char *node, const char *service,
| ^~~~~~~~~~~~~~~~
neco.c: In function ‘neco_errconv_from_gai’:
neco.c:6754:10: error: ‘EAI_MEMORY’ undeclared (first use in this function)
6754 | case EAI_MEMORY:
| ^~~~~~~~~~
neco.c: In function ‘getaddrinfo_from_tcp_addr_dl’:
neco.c:6778:12: error: variable ‘hints’ has initializer but incomplete type
6778 | struct addrinfo hints = { 0 };
| ^~~~~~~~
neco.c:6778:31: warning: excess elements in struct initializer
6778 | struct addrinfo hints = { 0 };
| ^
neco.c:6778:31: note: (near initialization for ‘hints’)
neco.c:6778:21: error: storage size of ‘hints’ isn’t known
6778 | struct addrinfo hints = { 0 };
| ^~~~~
neco.c:6801:22: error: ‘EAI_FAIL’ undeclared (first use in this function)
6801 | neco_gai_errno = EAI_FAIL;
| ^~~~~~~~
neco.c: In function ‘dial_tcp_dl’:
neco.c:6889:32: error: invalid use of undefined type ‘struct addrinfo’
6889 | fd = dial_connect_dl(ai->ai_family, ai->ai_socktype, ai->ai_protocol,
| ^~
neco.c:6889:47: error: invalid use of undefined type ‘struct addrinfo’
6889 | fd = dial_connect_dl(ai->ai_family, ai->ai_socktype, ai->ai_protocol,
| ^~
neco.c:6889:64: error: invalid use of undefined type ‘struct addrinfo’
6889 | fd = dial_connect_dl(ai->ai_family, ai->ai_socktype, ai->ai_protocol,
| ^~
neco.c:6890:15: error: invalid use of undefined type ‘struct addrinfo’
6890 | ai->ai_addr, ai->ai_addrlen, deadline);
| ^~
neco.c:6890:28: error: invalid use of undefined type ‘struct addrinfo’
6890 | ai->ai_addr, ai->ai_addrlen, deadline);
| ^~
neco.c:6894:16: error: invalid use of undefined type ‘struct addrinfo’
6894 | ai = ai->ai_next;
| ^~
neco.c: In function ‘listen_tcp_dl’:
neco.c:6977:27: error: invalid use of undefined type ‘struct addrinfo’
6977 | int fd = socket0(ainfo->ai_family, ainfo->ai_socktype, ainfo->ai_protocol);
| ^~
neco.c:6977:45: error: invalid use of undefined type ‘struct addrinfo’
6977 | int fd = socket0(ainfo->ai_family, ainfo->ai_socktype, ainfo->ai_protocol);
| ^~
neco.c:6977:65: error: invalid use of undefined type ‘struct addrinfo’
6977 | int fd = socket0(ainfo->ai_family, ainfo->ai_socktype, ainfo->ai_protocol);
| ^~
neco.c:6980:31: error: invalid use of undefined type ‘struct addrinfo’
6980 | ok = ok && bind0(fd, ainfo->ai_addr, ainfo->ai_addrlen) != -1;
| ^~
neco.c:6980:47: error: invalid use of undefined type ‘struct addrinfo’
6980 | ok = ok && bind0(fd, ainfo->ai_addr, ainfo->ai_addrlen) != -1;
| ^~
neco.c: In function ‘_pipe_’:
neco.c:7794:15: error: ‘PATH_MAX’ undeclared (first use in this function)
7794 | char path[PATH_MAX];
| ^~~~~~~~
I can compile it successfully by running:
cc -c neco.c
or
cc -c neco.c -std=gnu11
Environment
- Arch Linux (x86_64)
- cc (GCC) 14.1.1 20240522
cc -c neco.c -std=c11 succeeds on Mac and FreeBSD, but I can confirm it does not on Linux.
Perhaps one workaround is to add something like the following to the top of neco.c file.
#define _POSIX_C_SOURCE 200809L
#define _GNU_SOURCE
But that may cause other problems downstream.
I'll just remove the mention of it in the README.