An old project that I am stubborn to finish
The t-slot (final design here) was printed with the following settings:
- Colorfabb XT Black
- 220C noozle and 65C bed
- 0.25 mm noozle
- 0.1 mm layer thickness
- 100% infill
- Print Speed 18 mm/s
- Fan 60%
- 4.5 mm retraction and 40 mm/s
The rubber wheels for the bearings (design here) were printed with the following settings:
- Flexismart black
- 195C noozle and 60C bed
- 0.4 mm noozle
- 0.2 mm layer thickness
- 100% infill
- Print Speed 30 mm/s
- Fan 100%
- No retraction