This collection demonstrates how to construct and train a deep, bidirectional stacked LSTM using CNN features as input with CTC loss to perform robust word recognition.
The model is a straightforward adaptation of Shi et al.'s CRNN architecture (arXiv:1507.0571). The provided code downloads and trains using Jaderberg et al.'s synthetic data (IJCV 2016).
Currently updated for TensorFlow 1.10.
The model as build is a hybrid of Shi et al.'s CRNN architecture (arXiv:1507.0571) and the VGG deep convnet, which reduces the number of parameters by stacking pairs of small 3x3 kernels. In addition, the pooling is also limited in the horizontal direction to preserve resolution for character recognition. There must be at least one horizontal element per character.
Assuming one starts with a 32x32 image, the dimensions at each level of filtering are as follows:
| Layer | Op | KrnSz | Stride(v,h) | OutDim | H | W | PadOpt |
|---|---|---|---|---|---|---|---|
| 1 | Conv | 3 | 1 | 64 | 30 | 30 | valid |
| 2 | Conv | 3 | 1 | 64 | 30 | 30 | same |
| Pool | 2 | 2 | 64 | 15 | 15 | ||
| 3 | Conv | 3 | 1 | 128 | 15 | 15 | same |
| 4 | Conv | 3 | 1 | 128 | 15 | 15 | same |
| Pool | 2 | 2,1 | 128 | 7 | 14 | ||
| 5 | Conv | 3 | 1 | 256 | 7 | 14 | same |
| 6 | Conv | 3 | 1 | 256 | 7 | 14 | same |
| Pool | 2 | 2,1 | 256 | 3 | 13 | ||
| 7 | Conv | 3 | 1 | 512 | 3 | 13 | same |
| 8 | Conv | 3 | 1 | 512 | 3 | 13 | same |
| Pool | 3 | 3,1 | 512 | 1 | 13 | ||
| 9 | LSTM | 512 | |||||
| 10 | LSTM | 512 |
To accelerate training, a batch normalization layer is included before each pooling layer and ReLU non-linearities are used throughout. Other model details should be easily identifiable in the code.
The default training mechanism uses the ADAM optimizer with learning rate decay.
To completely train the model, you will need to download the mjsynth
dataset and pack it into sharded TensorFlow records. Then you can start
the training process, a tensorboard monitor, and an ongoing evaluation
thread. The individual commands are packaged in the accompanying Makefile.
make mjsynth-download
make mjsynth-tfrecord
make train &
make monitor &
make test
To monitor training, point your web browser to the url (e.g., (http://127.0.1.1:8008)) given by the Tensorboard output.
Note that it may take 4-12 hours to download the complete mjsynth data
set. A very small set (0.1%) of packaged example data is included; to
run the small demo, skip the first two lines involving mjsynth.
With a Geforce GTX 1080, the demo takes about 20 minutes for the validation character error to reach 45% (using the default parameters); at one hour (roughly 7000 iterations), the validation error is just over 20%.
With the full training data, by one million iterations the model typically converges to around 5% training character error and 27.5% word error.
The evaluate script (src/evaluate.py) streams statistics for one batch
of validation (or evaluation) data. It prints the iteration, evaluation batch
loss, label error (percentage of characters predicted incorrectly),
and the sequence error (percentage of words—entire sequences—predicted
incorrectly).
The test script (src/test.py) tallies statistics, finally
normalizing for all data. It prints the loss, label error, total number of
labels, sequence error, total number of sequences, and the label error
rate and sequence error rate.
To see the output of a small set of instances, the script
validation.py allows you to load a model and read an image one at a
time via the process's standard input and print the decoded output for
each. For example
cd src ; python validate.py < ~/paths_to_images.txt
Alternatively, you can run the program interactively by typing image paths in the terminal (one per line, type Control-D when you want the model to run the input entered so far).
There are many command-line options to configure training
parameters. Run train.py or test.py with the --help flag to see
them or inspect the scripts. Model parameters are not command-line
configurable and need to be edited in the code (see model.py).
Dynamic data can be used for training or testing by setting the
--nostatic_data flag.
You can use the --ipc_synth boolean flag [default=True] to determine
whether to use single-threaded or a buffered, multiprocess synthesis.
The --synth_config_file flag must be given with --nostatic_data.
The MapTextSynthesizer library supports training with dynamically synthesized data. The relevant code can be found within MapTextSynthesizer/tensorflow/generator
This version uses the TensorFlow Dataset for fast I/O. Training, testing, validation, and prediction use a custom Estimator.
This work was supported in part by the National Science Foundation under grant Grant Number 1526350.