Running two master nodes, powering one down, kube_vip is no longer contactable.
slbailey opened this issue · comments
Expected Behavior
k3s-01 and k3s-02 are master nodes
VIP is 192.168.60.222
When both nodes are online, the VIP is pingable.
Power down k3s-01
VIP remains pingable.
Current Behavior
When I power down k3s-01, VIP is no longer pingable. VIP remains unresponsive until k3s-01 is powered back up. Not sure if this is by design and HA is only available with 3 master nodes or if there is an issue I'm not aware of.
Steps to Reproduce
- Create cluster with 5 nodes (2 master and 3 worker)
- Verify (ping -t 192.168.60.222) VIP is contactable
- Power down k3s-01 (one master node)
- Verify (ping -t 192.168.60.222) VIP no longer responds.
Variables Used
all.yml
---
k3s_version: v1.29.0+k3s1
# this is the user that has ssh access to these machines
ansible_user: slb
systemd_dir: /etc/systemd/system
# Set your timezone
system_timezone: "America/New_York"
# interface which will be used for flannel
flannel_iface: "eth0"
# uncomment calico_iface to use tigera operator/calico cni instead of flannel https://docs.tigera.io/calico/latest/about
# calico_iface: "eth0"
calico_ebpf: false # use eBPF dataplane instead of iptables
calico_tag: "v3.27.0" # calico version tag
# uncomment cilium_iface to use cilium cni instead of flannel or calico
# ensure v4.19.57, v5.1.16, v5.2.0 or more recent kernel
# cilium_iface: "eth0"
cilium_mode: "native" # native when nodes on same subnet or using bgp, else set routed
cilium_tag: "v1.14.6" # cilium version tag
cilium_hubble: true # enable hubble observability relay and ui
# if using calico or cilium, you may specify the cluster pod cidr pool
cluster_cidr: "10.52.0.0/16"
# enable cilium bgp control plane for lb services and pod cidrs. disables metallb.
cilium_bgp: false
# bgp parameters for cilium cni. only active when cilium_iface is defined and cilium_bgp is true.
cilium_bgp_my_asn: "64513"
cilium_bgp_peer_asn: "64512"
cilium_bgp_peer_address: "192.168.60.1"
cilium_bgp_lb_cidr: "192.168.31.0/24" # cidr for cilium loadbalancer ipam
# apiserver_endpoint is virtual ip-address which will be configured on each master
apiserver_endpoint: "192.168.60.222"
# k3s_token is required masters can talk together securely
# this token should be alpha numeric only
k3s_token: "superdupersupersecretPassw0rd"
# The IP on which the node is reachable in the cluster.
# Here, a sensible default is provided, you can still override
# it for each of your hosts, though.
k3s_node_ip: "{{ ansible_facts[(cilium_iface | default(calico_iface | default(flannel_iface)))]['ipv4']['address'] }}"
# Disable the taint manually by setting: k3s_master_taint = false
k3s_master_taint: "{{ true if groups['node'] | default([]) | length >= 1 else false }}"
# these arguments are recommended for servers as well as agents:
extra_args: >-
{{ '--flannel-iface=' + flannel_iface if calico_iface is not defined and cilium_iface is not defined else '' }}
--node-ip={{ k3s_node_ip }}
# change these to your liking, the only required are: --disable servicelb, --tls-san {{ apiserver_endpoint }}
# the contents of the if block is also required if using calico or cilium
extra_server_args: >-
{{ extra_args }}
{{ '--node-taint node-role.kubernetes.io/master=true:NoSchedule' if k3s_master_taint else '' }}
{% if calico_iface is defined or cilium_iface is defined %}
--flannel-backend=none
--disable-network-policy
--cluster-cidr={{ cluster_cidr | default('10.52.0.0/16') }}
{% endif %}
--tls-san {{ apiserver_endpoint }}
--disable servicelb
--disable traefik
extra_agent_args: >-
{{ extra_args }}
# image tag for kube-vip
kube_vip_tag_version: "v0.6.4"
# tag for kube-vip-cloud-provider manifest
# kube_vip_cloud_provider_tag_version: "main"
# kube-vip ip range for load balancer
# (uncomment to use kube-vip for services instead of MetalLB)
# kube_vip_lb_ip_range: "192.168.30.80-192.168.30.90"
# metallb type frr or native
metal_lb_type: "native"
# metallb mode layer2 or bgp
metal_lb_mode: "layer2"
# bgp options
# metal_lb_bgp_my_asn: "64513"
# metal_lb_bgp_peer_asn: "64512"
# metal_lb_bgp_peer_address: "192.168.30.1"
# image tag for metal lb
metal_lb_speaker_tag_version: "v0.13.12"
metal_lb_controller_tag_version: "v0.13.12"
# metallb ip range for load balancer
metal_lb_ip_range: "192.168.60.80-192.168.60.90"
# Only enable if your nodes are proxmox LXC nodes, make sure to configure your proxmox nodes
# in your hosts.ini file.
# Please read https://gist.github.com/triangletodd/02f595cd4c0dc9aac5f7763ca2264185 before using this.
# Most notably, your containers must be privileged, and must not have nesting set to true.
# Please note this script disables most of the security of lxc containers, with the trade off being that lxc
# containers are significantly more resource efficient compared to full VMs.
# Mixing and matching VMs and lxc containers is not supported, ymmv if you want to do this.
# I would only really recommend using this if you have particularly low powered proxmox nodes where the overhead of
# VMs would use a significant portion of your available resources.
proxmox_lxc_configure: false
# the user that you would use to ssh into the host, for example if you run ssh some-user@my-proxmox-host,
# set this value to some-user
proxmox_lxc_ssh_user: root
# the unique proxmox ids for all of the containers in the cluster, both worker and master nodes
proxmox_lxc_ct_ids:
- 100
- 101
- 102
- 103
- 104
# Only enable this if you have set up your own container registry to act as a mirror / pull-through cache
# (harbor / nexus / docker's official registry / etc).
# Can be beneficial for larger dev/test environments (for example if you're getting rate limited by docker hub),
# or air-gapped environments where your nodes don't have internet access after the initial setup
# (which is still needed for downloading the k3s binary and such).
# k3s's documentation about private registries here: https://docs.k3s.io/installation/private-registry
custom_registries: false
# The registries can be authenticated or anonymous, depending on your registry server configuration.
# If they allow anonymous access, simply remove the following bit from custom_registries_yaml
# configs:
# "registry.domain.com":
# auth:
# username: yourusername
# password: yourpassword
# The following is an example that pulls all images used in this playbook through your private registries.
# It also allows you to pull your own images from your private registry, without having to use imagePullSecrets
# in your deployments.
# If all you need is your own images and you don't care about caching the docker/quay/ghcr.io images,
# you can just remove those from the mirrors: section.
custom_registries_yaml: |
mirrors:
docker.io:
endpoint:
- "https://registry.domain.com/v2/dockerhub"
quay.io:
endpoint:
- "https://registry.domain.com/v2/quayio"
ghcr.io:
endpoint:
- "https://registry.domain.com/v2/ghcrio"
registry.domain.com:
endpoint:
- "https://registry.domain.com"
configs:
"registry.domain.com":
auth:
username: yourusername
password: yourpassword
# Only enable and configure these if you access the internet through a proxy
# proxy_env:
# HTTP_PROXY: "http://proxy.domain.local:3128"
# HTTPS_PROXY: "http://proxy.domain.local:3128"
# NO_PROXY: "*.domain.local,127.0.0.0/8,10.0.0.0/8,172.16.0.0/12,192.168.0.0/16"Hosts
host.ini
[master]
192.168.60.2
192.168.60.3
[node]
192.168.60.4
192.168.60.5
192.168.60.6
# only required if proxmox_lxc_configure: true
# must contain all proxmox instances that have a master or worker node
# [proxmox]
# 192.168.30.43
[k3s_cluster:children]
master
node- I've checked the General Troubleshooting Guide