This project displays the temperature and humidity readings from a DHT22 sensor on a 128x64 OLED display. What makes this project different from similar projects is a progress bar at the bottom of the display showing you how long until the readings are refreshed.
- 1x ESP32 WROOM 4Mb Devkit V1
- 1x DHT-22 sensor
- 1x OLED display, 128 by 64 pixels, I2C compatible
The following libraries are required to run the project:
The components are wired up as follows:
The DHT-22 sensor has its data pin connected to pin 4 on the ESP32 board.
The SLC pin of the display is connected to pin 21 on the ESP32 board. The SDA pin of the display is connected to pin 22 on the ESP32 board.
This project is released under the MIT license.