Jiří Staněk's repositories
RX_nRF24L01_Telemetry_Motor_Servo
RC receiver nRF24L01 with ATmega328P/16Mhz. Includes 2x motor driver with brake (e.g. mix tank-arcade), servo outputs, telemetry voltage A1 and RSSI. Example of RX prototype:
TX_nRF24_2ch_Oled
Simple surface 2 channel RC transmitter for cars, boats and tanks. The hardware includes a low-cost nRF24L01+ transceiver and an ATmega328P processor with an OLED screen. It contains the telemetry of the monitored voltage RX.
RX_Cabell_8ch_Motor_Servo
RC receiver nRF24L01 "Cabell protocol" Arduino ATmega328P/16MHz with OpenAVRc and Multiprotocol support. This RX includes 2x motor controller with brake and has 6x servo output.
PCB_Elegance
PCB Elegance is a collection of circuit board design tools for Windows 7, 8 and 10. Including schematic capture, board layout, and manufacturing file generation. Original source:
RX_Bayang_Servo
RC receiver nRF24L01 "Bayang protocol" ATmega328P/16MHz with OpenAVRc and Multiprotocol support. RX includes 4x servo output and 4x logic output.
TX_nRF24L01_5ch_Telemetry_LED
Simple surface 5 channel RC transmitter for cars, boats and tanks. The hardware includes a low-cost nRF24L01+ transceiver and an ATmega328P processor. It contains the telemetry of the monitored RX voltage by means of a flashing LED indication.
TX_FW_Multi_Stanek
Support for custom Arduino-based DIY receivers with RF24 library. Included communication nRF24L01P "Stanek". Fixed RF channel, fixed address. Channel reduction in sub protocols 2, 3, 4, 5, 6, 8, 10 and 12ch. This is the maximum in the "Servo" library on the Atmega328P processor. Telemetry A1 for measuring 1S Lipo power supply RX and RSSI.