SFE_CC3000_Library

Arduino library for the TI CC3000 WiFi Shield and Breakout Board.

Version

v1.6

Note that the SFE_CC3000_Library was tested with CC3000 firmware v1.24.

The following are known problems with the library and are being actively worked on:

Tx/Rx buffers for the CC3000 can easily overflow. Buffer checks need to be added to the library.
AES encryption for SmartConfig is not supported.
Static IP is not working at this time (only DHCP works).
HTTP POST requests work but do not print the whole server response to the console.
The library does not work with any Teensey boards. Only ATmega328- and ATmega2560-based Arduinos have been tested.
UDP has been tested for transmit only. Receiving UDP packets on the CC3000 is currently not working.

Download the Git repository as a ZIP ("Download ZIP" button)
Unzip
Copy the entire directory (SFE_CC3000_Library) to /libraries
Open the Arduino program
Select File -> Examples -> SFE_CC3000_Library -> WebClient
Change ap_ssid and ap_password to match your WiFi's SSID and password
If your WiFi's security is anything other than WPA2, change ap_security to one of WLAN_SEC_UNSEC, WLAN_SEC_WEP, WLAN_SEC_WPA, or WLAN_SEC_WPA2
Plug in your Arduino and CC3000 board
Go to Tools -> Board and select your Arduino board
Go to Tools -> Serial Port and select the COM port of your Arduino board
Click "Upload"
Go to Tools -> Serial Monitor
Ensure the baud rate is set at 115200 baud
The program should connect and print out the HTML of www.example.com

v1.6

v1.5

v1.4

v1.3

Merged pull request from Jacob Rosenthal (https://github.com/jacobrosenthal)
- Changed IP Addresses to conform to Arduino's other networking libraries (e.g. using the IPAddress class)
- Implemented UDP connections

v1.2

v1.1

v1.0

This code is beerware; if you see me (or any other SparkFun employee) at the local, and you've found our code helpful, please buy us a round!

Distributed as-is; no warranty is given.