FM24V05-G
bobybobybob opened this issue · comments
FM24V05
Starting...
....... .......
FRAM Device IDs
Manufacturer 0xD5A
ProductID 0xC69
Density code 0xC
Starting...
FRAM_MB85RC_I2C object created
I2C device address 0x50
WP pin number 13
Write protect management: false
Memory Chip NOT FOUND
...... ...... ......
Starting...
FRAM_MB85RC_I2C object created
I2C device address 0x50
WP pin number 13
Write protect management: false
Memory Chip NOT FOUND
...... ...... ......
Data_0: true
Data_1: 1.3574999570
Data_2: 314159
Data_3: 142
Data_4: 0x50
...... ...... ......
Init Done - array loaded
...... ...... ......
Write failed
...... ...... ......
Read failed
...... ...... ......
Data_0: false
Data_1: 0.0000000000
Data_2: 0
Data_3: 0
Data_4: 0x0
...... ...... ......
Read Write test done - check data if successfull
...... ...... ......
Please share your code. It seems you did not initiate properly the object to match your device.
I use the example Demos from your Library.
Thanks for your help.
Obviously, the chip you used does not match to product IDs of the Cypress datasheet.
As consequence, the library is considering the chip not found. This is a normal behaviour.
You should try to switch to manual mode as the lib allows you to do so.
There i have buy two. Very sad that there are Fake one...
Sorry for that.
Just try to address it in manual mode. Maybe fake but working
If same issue than #18 please try manual mode by setting density manually
No feedback, closing the issue