Stealthburner body, lever cut - cut isn't long enough
garyd9 opened this issue · comments
I'm doing some test fittings with this model, and finding that the "cut" made to the SB body isn't long enough for the LDO Orbiter 2.0. When the SB body is fully attached, the Orbiter lever won't close (at least not enough to make the filament even snug.) (Or, if the orbiter lever is closed when assembling, the stealthburner part won't properly attach.)
I've attached two images.
The first (0919) is me trying to snip parts of the plastic off (and splitting layers) to try to get things to fit.
The second image (0920) is your original STL part attached with the orbiter filament lever closed. Note that cut out for the orbiter door isn't accommodating the lever. Is it possible that LDO revised the lever part to make it larger and that's causing this problem?
(Note that I have filament inserted into the orbiter so the orbiter door isn't closed more than it might be in a real use situation.)
Here's another version of the SB body. I took this from the latest SB github archive, and cut a larger space for the orbiter lever (and a bit of an internal piece to allow smooth movement.) While I've test fitted this (and it has plenty of clearance), I haven't actually installed it in a working machine.
(These modifications are licensed under the original Voron license. In other words, do with it what you'd like.)