Upload to ESP32-Wroom
DSRocker opened this issue · comments
DSRocker commented
Hi,
I tried to flash (with ESP-Flasher-Windows-x64) the homepoint_aztouchmod_full.bin to my ESP32-WROOM.
This is the Log:
Using 'COM4' as serial port.
Connecting....
Detecting chip type... ESP32
Connecting......
Chip Info:
- Chip Family: ESP32
- Chip Model: ESP32-D0WDQ6 (revision 1)
- Number of Cores: 2
- Max CPU Frequency: 240MHz
- Has Bluetooth: YES
- Has Embedded Flash: NO
- Has Factory-Calibrated ADC: YES
- MAC Address: 78:E3:6D:09:81:B8
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 460800
Changed. - Flash Size: 4MB
Unexpected error: The firmware binary is invalid (magic byte=FF, should be E9)
Thanks!
Markus Badberg commented
Have you tried the espgeneric file?
I've tried today both, and they worked.
DSRocker commented
It works fine with ESP32 Download Tool.
Thanks a lot
Another question: is it possible to connect / to wire 3,5" TFT LCD for arduino uno shield (red) ILI9481 https://www.ebay.de/itm/174949498297?var=474095516573