Can't boot from USB

[riyas1980]

Hello,

I have exactly same model as you (Model, Bios etc...). I have Catalina opencore up and running. And wanted to try Big Sur.

I've followed this guide to prepare the usb drive: https://manjaro.site/how-to-create-macos-big-sur-11-0-1-usb-installer-for-hackintosh/

Once everything is done, I've replaced the EFI folder with yours.

Unfortunately, when I boot with the USB drive, I can not see the Big Sur Installation partition. I can see my Catalina Drive and the recovery drive.

If I boot normally with my internal Disk, I can see Mac Os Big Sur installation Drive. If I choose, I have a "no entry" sign and the PC stops.

Can you please help me ?

Thanks and Regards,

[OrCAD]

please use it. https://github.com/shuai620/NUC7i7BNH/tree/master/OC_0.6.3/EFI riyas1980 <[e-mail]>, 2 Ara 2020 Çar, 14:10 tarihinde şunu yazdı:

…

Hello, I have exactly same model as you (Model, Bios etc...). I have Catalina opencore up and running. And wanted to try Big Sur. I've followed this guide to prepare the usb drive: https://manjaro.site/how-to-create-macos-big-sur-11-0-1-usb-installer-for-hackintosh/ Once everything is done, I've replaced the EFI folder with yours. Unfortunately, when I boot with the USB drive, I can not see the Big Sur Installation partition. I can see my Catalina Drive and the recovery drive. If I boot normally with my internal Disk, I can see Mac Os Big Sur installation Drive. If I choose, I have a "no entry" sign and the PC stops. Can you please help me ? Thanks and Regards, — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#8>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ANLLX2PW25NEM6YHPBSXCJ3SSYODNANCNFSM4UKKY4RA> .

-- EnderA

[riyas1980]

Thanks Enderaltin. That's what I've used. My EFI folder on installation USB drive is from here:

https://github.com/shuai620/NUC7i7BNH/tree/master/OC_0.6.3/EFI

But When I boot with the drive, I don't have the Big Sur Entry

[OrCAD]

Dual booting right? first delete the Windows folder in EFI. riyas1980 <[e-mail]>, 2 Ara 2020 Çar, 14:21 tarihinde şunu yazdı:

…

Thanks Enderaltin. That's what I've used. My EFI folder on installation USB drive is from here: https://github.com/shuai620/NUC7i7BNH/tree/master/OC_0.6.3/EFI But When I boot with the drive, I don't have the Big Sur Entry — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#8 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ANLLX2MEYQ5XHI5HGUBQG6DSSYPL3ANCNFSM4UKKY4RA> .

-- EnderA

[riyas1980]

No I am not dual booting. I already have a working Catalina in the SSD. I just want to erase the internal drive and install Big Sur. But unfortunately, Mac Os Big Sur installation is not showing up.

[OrCAD]

I downloaded the installation file from here. https://drive.google.com/file/d/10mWq9pq1ZPc34TI3YoW7TMbakmnKu_iQ/view?usp=sharing https://osxinfo.net/konu/macos-big-sur-intel-ve-amd-kurulum-imaji.17852/ riyas1980 <[e-mail]>, 2 Ara 2020 Çar, 14:31 tarihinde şunu yazdı:

…

No I am not dual booting. I already have a working Catalina in the SSD. I just want to erase the internal drive and install Big Sur. But unfortunately, Mac Os Big Sur installation is not showing up. — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#8 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ANLLX2O4IP4XBDI7CBDFDUTSSYQPXANCNFSM4UKKY4RA> .

-- EnderA

[riyas1980]

Ok I will download the file and try. So you have followed this guide (https://osxinfo.net/konu/macos-big-sur-intel-ve-amd-kurulum-imaji.17852/) to prepare your pendrive ?

[riyas1980]

I've finished downloading the file (https://drive.google.com/file/d/10mWq9pq1ZPc34TI3YoW7TMbakmnKu_iQ/view?usp=sharing)

I have a 12gb raw file. Can you please tell me how you can prepare this file for usb drive ?

Thanks

[riyas1980]

Sorry. I'am trying with Etcher.

[P.Shuai]

Maybe you need to modify 'Misc->Security->Scan Policy' in the config.plist to allow usb scan.

[OrCAD]

https://etcher.io/ P.Shuai <[e-mail]>, 2 Ara 2020 Çar, 16:31 tarihinde şunu yazdı:

…

Maybe you need to modify 'Misc->Security->Scan Policy' in the config.plist to allow usb scan. — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#8 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ANLLX2PGZ2YN6QUQX74UAUTSSY6T5ANCNFSM4UKKY4RA> .

-- EnderA

[riyas1980]

Maybe you need to modify 'Misc->Security->Scan Policy' in the config.plist to allow usb scan.

I went to this setting. Actual value is 983299 (class: number). What do I need to put here to allow usb scan ?

Thanks

[riyas1980]

Finished reimage with Etcher. But I am not able to boot with the drive

EFI Folder is like the screenshot above. Did you boot with this EFI Folder or the folder from here: https://github.com/shuai620/NUC7i7BNH/tree/master/OC_0.6.3/EFI

With Shuai620's folder, I am still not able to find Big Sur Installation,

[e-mail], 2 Ara 2020 Çar, 16:31 tarihinde şunu yazdı:

…
Maybe you need to modify 'Misc->Security->Scan Policy' in the config.plist to allow usb scan. — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#8 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/ANLLX2PGZ2YN6QUQX74UAUTSSY6T5ANCNFSM4UKKY4RA .
-- EnderA

[OrCAD]

I have never touched those parts. riyas1980 <[e-mail]>, 2 Ara 2020 Çar, 17:37 tarihinde şunu yazdı:

…

Finished reimage with Etcher. But I am not able to boot with the drive [image: Capture d’écran 2020-12-02 à 15 30 40] <https://user-images.githubusercontent.com/35848952/100886056-a495c080-34b3-11eb-9d13-75fc479268e2.png> EFI Folder is like the screenshot above. Did you boot with this EFI Folder or the folder from here: https://github.com/shuai620/NUC7i7BNH/tree/master/OC_0.6.3/EFI With Shuai620's folder, I am still not able to find Big Sur Installation, ***@***.***, 2 Ara 2020 Çar, 16:31 tarihinde şunu yazdı: … <#m_2037242206934883047_> Maybe you need to modify 'Misc->Security->Scan Policy' in the config.plist to allow usb scan. — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#8 (comment) <#8 (comment)>>, or unsubscribe https://github.com/notifications/unsubscribe-auth/ANLLX2PGZ2YN6QUQX74UAUTSSY6T5ANCNFSM4UKKY4RA . -- EnderA — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#8 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ANLLX2M4JUMZGOUZGQD3CMTSSZGJ5ANCNFSM4UKKY4RA> .

-- EnderA

[riyas1980]

Maybe you need to modify 'Misc->Security->Scan Policy' in the config.plist to allow usb scan.

I went to this setting. Actual value is 983299 (class: number). What do I need to put here to allow usb scan ?

Thanks

Finally, the number is 0 to allow usb scan. It's working now. Installation finished. Now I am trying to use Intel wifi. Keep you informed. Thanks again for your help @enderaltin @shuai620

[OrCAD]

https://github.com/OpenIntelWireless/itlwm 2 Ara 2020 Çar 20:24 tarihinde riyas1980 <[e-mail]> şunu yazdı:

…

Maybe you need to modify 'Misc->Security->Scan Policy' in the config.plist to allow usb scan. I went to this setting. Actual value is 983299 (class: number). What do I need to put here to allow usb scan ? Thanks Finally, the number is 0 to allow usb scan. It's working now. Installation finished. Now I am trying to use Intel wifi. Keep you informed. Thanks again for your help @enderaltin <https://github.com/enderaltin> @shuai620 <https://github.com/shuai620> — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#8 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ANLLX2I5NRINNG7BNOENHULSSZZ4RANCNFSM4UKKY4RA> .