Devel - Json Exception Error
s3m1s0n1c opened this issue · comments
Sonic commented
Hey Guys,
I'm getting the following error on devel in docker
sdr-broker-1 | 1707631914: New client connected from 172.23.0.3:35300 as auto-6D46A5AC-BBC8-2DFB-0673-3BE8FC8496CC (p2, c1, k60, u'admin').
sdr-sdr-scanner-1 | [2024-02-11 17:11:54.589812] [info ] [Mqtt ] connected
sdr-sdr-scanner-1 | [2024-02-11 17:11:55.777811] [info ] [SoapySDR ] found 2 devices:
sdr-sdr-scanner-1 | [2024-02-11 17:11:55.778410] [info ] [SoapySDR ] #0, name: Realtek RTL2838UHIDIR-V3 Rafael Micro R820T, driver: rtlsdr, serial: SDR_V3_05
sdr-sdr-scanner-1 | [2024-02-11 17:11:56.409406] [info ] [SoapySDR ] gain: TUNER, min: 0 dB, max: 49.6 dB
sdr-sdr-scanner-1 | [2024-02-11 17:11:56.410176] [info ] [SoapySDR ] frequency range: 24 MHz - 1764 MHz
sdr-sdr-scanner-1 | [2024-02-11 17:11:56.410609] [info ] [SoapySDR ] sample rates: 250 kHz, 1024 kHz, 1536 kHz, 1792 kHz, 1920 kHz, 2048 kHz, 2160 kHz, 2560 kHz, 2880 kHz, 3200 kHz
sdr-sdr-scanner-1 | [2024-02-11 17:11:56.450125] [info ] [SoapySDR ] #1, name: Realtek RTL2838UHIDIR-V3 Rafael Micro R820T, driver: rtlsdr, serial: SDR_V3_04
sdr-sdr-scanner-1 | [2024-02-11 17:11:57.080151] [info ] [SoapySDR ] gain: TUNER, min: 0 dB, max: 49.6 dB
sdr-sdr-scanner-1 | [2024-02-11 17:11:57.080193] [info ] [SoapySDR ] frequency range: 24 MHz - 1764 MHz
sdr-sdr-scanner-1 | [2024-02-11 17:11:57.080206] [info ] [SoapySDR ] sample rates: 250 kHz, 1024 kHz, 1536 kHz, 1792 kHz, 1920 kHz, 2048 kHz, 2160 kHz, 2560 kHz, 2880 kHz, 3200 kHz
sdr-sdr-scanner-1 | [2024-02-11 17:11:57.193833] [info ] [Mqtt ] stop thread id: 12
sdr-sdr-scanner-1 | [2024-02-11 17:11:57.194291] [error ] [main ] main exception: [json.exception.type_error.302] type must be number, but is null
sdr-broker-1 | 1707631917: Client auto-6D46A5AC-BBC8-2DFB-0673-3BE8FC8496CC disconnected.
The config page isn't showing the rtl-sdr's
I can see them using rtl_test
Using the default config.json
Thanks
Sonic
Klammraute commented
same
Borys Dyczko commented
It looks like not default config, try to restore default config:
docker compose down
docker volume ls # select one with name contains sdr_config
docker volume rm # type the name above
docker compose up -d