UV-5R8W reboots for VFO change

[Andy Baker]

UV-5R8W reboots for VFO change, every time. I don't know if this is required or not, radio responds to magic with "Radio did not respond"

UV5R8W is as far as I can tell, simply an 8W version of the UV5R

See serial trace from below.

C:\Users\DrFrank\Downloads>baoclone -a -v COM2 144.390
Connect to COM2.
# Sending magic: 50-52-4f-47-52-41-4d
Radio did not respond.
# Sending magic: 50-bb-ff-20-12-07-25
# Identifier: aa-30-76-04-00-05-20-dd
Detected Baofeng UV-5R.
# Read 0x0e40: 00-00-00-01-05-00-01-00-01-00-0f-00-00-00-80-00-ff-ff-ff-ff-00-00-00-00-00-00-00-00-00-00-00-00-ff-ff-ff-ff-ff-ff-ff-ff-ff-ff-ff-ff-ff-ff-ff-ff-ff-00-ff-ff-ff-ff-24-24-ff-ff-ff-ff-ff-ff-ff-ff
# Read 0x0f00: ff-ff-ff-ff-ff-ff-ff-ff-01-04-05-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-50-3f-ff-ff-ff-ff-ff-ff-ff-ff-01-04-05-00-03-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-50-3f
VFO Band Receive  TxOffset R-Squel T-Squel Step Power FM     Scode
 A  VHF  144.3900  0          -       -    20.0 High  Wide   -
# Write 0x0e40: 00-00-00-01-05-00-01-00-01-00-0f-00-00-00-80-00
# Write 0x0f00: ff-ff-ff-ff-ff-ff-ff-ff-01-04-04-03-09-00-00-00
# Write 0x0f10: 00-00-00-00-00-00-00-00-00-00-00-00-00-00-50-3f
# Write 0x0f20: ff-ff-ff-ff-ff-ff-ff-ff-01-04-05-00-03-00-00-00
# Write 0x0f30: 00-00-00-00-00-00-00-00-00-00-00-00-00-00-50-3f
Close device.

C:\Users\DrFrank\Downloads>

Thank you.