SDSC "drive-data" roll
Overview
This roll bundles the scripts and configuration for drive performance testing tools.
Requirements
To build/install this roll you must have root access to a Rocks development machine (e.g., a frontend or development appliance).
If your Rocks development machine does not have Internet access you must
download the appropriate drive-data source file(s) using a machine that does
have Internet access and copy them into the src/<package>
directories on your
Rocks development machine.
Dependencies
The sdsc-roll must be installed on the build machine, since the build process depends on make include files provided by that roll.
Building
To build the drive-data-roll, execute this on a Rocks development machine (e.g., a frontend or development appliance):
% make 2>&1 | tee build.log
A successful build will create the file drive-data-*.disk1.iso
. If you built
the roll on a Rocks frontend, proceed to the installation step. If you built the
roll on a Rocks development appliance, you need to copy the roll to your Rocks
frontend before continuing with installation.
Installation
To install, execute these instructions on a Rocks frontend:
% rocks add roll *.iso
% rocks enable roll drive-data
% cd /export/rocks/install
% rocks create distro
% rocks run roll drive-data | bash
Testing
The drive-data-roll includes a test script which can be run to verify proper installation of the roll documentation, binaries and module files. To run the test scripts execute the following command(s):
% /root/rolltests/drive-data.t