Detection of SF1000 Mod

[Wanama78]

Hello, I have made a small adjustment which you are welcome to adopt.

{0x02, 0x0a, 0x0005, "Thrustmaster T300 Ferrari SF1000 Edition"},

static const struct tm_wheel_info tm_wheels_infos[] = {
{0x00, 0x02, 0x0002, "Thrustmaster T500RS"},
{0x02, 0x00, 0x0005, "Thrustmaster T300RS (Missing Attachment)"},
{0x02, 0x03, 0x0005, "Thrustmaster T300RS (F1 attachment)"},
{0x02, 0x04, 0x0005, "Thrustmaster T300 Ferrari Alcantara Edition"},
{0x02, 0x0a, 0x0005, "Thrustmaster T300 Ferrari SF1000 Edition"},
{0x02, 0x06, 0x0005, "Thrustmaster T300RS"},
{0x02, 0x09, 0x0005, "Thrustmaster T300RS (Open Wheel Attachment)"},
{0x03, 0x06, 0x0006, "Thrustmaster T150RS"}
//{0x04, 0x07, 0x0001, "Thrustmaster TMX"}
};

[Wanama78]

Hi,

{0x02, 0x04, 0x000b, "Thrustmaster T300 Ferrari Alcantara Edition"},
0x000b should work, but it does not.
then the ID should be: 0xb696 in lsusb.
But this does not happen.
This should be the switch that switches the wheel to advanced mode.

This will be spent, everything with 0x000b:

[ 3479.919480] usb 3-2: new full-speed USB device number 14 using xhci_hcd
[ 3480.076307] usb 3-2: New USB device found, idVendor=044f, idProduct=b65d, bcdDevice= 1.00
[ 3480.076313] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3480.076315] usb 3-2: Product: Thrustmaster FFB Wheel
[ 3480.076317] usb 3-2: Manufacturer: Thrustmaster
[ 3480.092432] input: Thrustmaster Thrustmaster FFB Wheel as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.3/usb3/3-2/3-2:1.0/0003:044F:B65D.0011/input/input32
[ 3480.092559] hid-thrustmaster 0003:044F:B65D.0011: input,hidraw6: USB HID v1.00 Gamepad [Thrustmaster Thrustmaster FFB Wheel] on usb-0000:2a:00.3-2/input0
[ 3480.115288] hid-thrustmaster 0003:044F:B65D.0011: Wheel with (model, attachment) = (0x2, 0xa) is a Thrustmaster T300RS Ferrari SF1000 Edition. attachment_found=1

It stops here, nothing happens.

When I unplug the wheel, it comes:

[ 3705.686147] usb 3-2: USB disconnect, device number 14
[ 3705.688704] hid-thrustmaster 0003:044F:B65D.0011: Success?! The wheel should have been initialized!

With the value 0x0005, this is what you get:

[ 1768.298918] usb 3-2: new full-speed USB device number 11 using xhci_hcd
[ 1768.455325] usb 3-2: New USB device found, idVendor=044f, idProduct=b65d, bcdDevice= 1.00
[ 1768.455332] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1768.455335] usb 3-2: Product: Thrustmaster FFB Wheel
[ 1768.455337] usb 3-2: Manufacturer: Thrustmaster
[ 1768.493194] input: Thrustmaster Thrustmaster FFB Wheel as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.3/usb3/3-2/3-2:1.0/0003:044F:B65D.000E/input/input29
[ 1768.493279] hid-thrustmaster 0003:044F:B65D.000E: input,hidraw6: USB HID v1.00 Gamepad [Thrustmaster Thrustmaster FFB Wheel] on usb-0000:2a:00.3-2/input0
[ 1768.516304] hid-thrustmaster 0003:044F:B65D.000E: Wheel with (model, attachment) = (0x2, 0xa) is a Thrustmaster T300RS Ferrari SF1000 Edition. attachment_found=1
[ 1768.517417] usb 3-2: USB disconnect, device number 11
[ 1768.520374] hid-thrustmaster 0003:044F:B65D.000E: Success?! The wheel should have been initialized!
[ 1769.175574] usb 3-2: new full-speed USB device number 12 using xhci_hcd
[ 1769.338304] usb 3-2: New USB device found, idVendor=044f, idProduct=b66e, bcdDevice= 1.00
[ 1769.338310] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1769.338312] usb 3-2: Product: Thrustmaster T300RS Racing wheel
[ 1769.338313] usb 3-2: Manufacturer: Thrustmaster
[ 1769.357495] input: Thrustmaster Thrustmaster T300RS Racing wheel as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.3/usb3/3-2/3-2:1.0/0003:044F:B66E.000F/input/input30
[ 1769.357630] hid-generic 0003:044F:B66E.000F: input,hidraw6: USB HID v1.11 Joystick [Thrustmaster Thrustmaster T300RS Racing wheel] on usb-0000:2a:00.3-2/input0

This is recognized without any problems.
Just not the extension.

I'll send you the Wireshark recording of what happens with hid-tminit.
Maybe you can see something there.

Tell me what else you need.

[Dario Pagani]

yeah sure, open a pull request