Note: - don't include adaptive_mesh.cfg AND this.

[github-actions]

Line: 11

ender-configs//klipper/mesh-print-area-only.cfg

Lines 8 to 18 in 9e7eb4e

 # Cura slicer 
 # PRINT_AREA_MESH_CALIBRATE AREA_START=%MINX%,%MINY% AREA_END=%MAXX%,%MAXY% 
  
 # TODO: Note: - don't include adaptive_mesh.cfg AND this. 
  
 [gcode_macro PRINT_AREA_MESH_CALIBRATE] 
 rename_existing: BED_MESH_CALIBRATE_BASE 
 ; gcode parameters 
 variable_parameter_AREA_START : 0,0 
 variable_parameter_AREA_END : 0,0 
 ; the clearance between print area and probe area