Accelerated graphics support library for Circle
Far from complete
- Unified rendering context initialization for OpenVG and OpenGL ES
- Text display and font handling for OpenVG
- Unified graphics thread handling
Normally you need a git client to get the libgraphics source code. Go to the directory where you want to place libgraphics on your hard disk and enter:
git clone https://github.com/rsta2/libgraphics.git libgraphics
cd libgraphics
git submodule update --init
This will place the source code in the subdirectory libgraphics/ and clones the submodule circle into the libgraphics/circle/ subdirectory.
libgraphics uses the Circle bare metal build environment for the Raspberry Pi. You need an appropriate compiler toolchain for ARM processors to build it. Have a look at the Circle README.md file (in circle/) for further information on this (section Building). The build information herein is for Linux hosts only. For building on other hosts you have to adapt some script files.
When the toolchain is installed on your computer you can build libgraphics using the following commands:
./configure 2 arm-none-eabi-
./makeall clean
./makeall
The configure command writes a Config.mk file for Circle. "2" is the major revision number of your Raspberry Pi (1, 2 or 3). The second (optional) parameter is the prefix of the commands of your toolchain and can be preceded with a path. Do not forget the dash at the end of the prefix!
If the build was successful, you find the library file of libgraphics in the lib/ subdirectory with the name libgraphics.a.
If you want to try one of the provided sample programs, now go its subdirectory in sample/ and do:
make clean
make
The built kernel image can be installed as described in the main Circle README.md file.