Scale couldn't calibrated
free118 opened this issue · comments
Hello Roman,
I'm not sure if you have seen my post here.[https://www.kaffee-netz.de/threads/millcontrol-arduino-muehlensteuerung-mit-timer-gewichtsautomatik-waagensteuerung-und-brew-timer.95553/page-10]
The problem is still there.
I dig a little bit in your code. So i found out that my scale is working and i get sufficent values.
e.g.
data = 8870400
data + 50g = ~8920450
noise = 15844
So I think the scale it self is fine. Also the date/noise ratio looks good.
So i don't know why the calibration didn't work. I get stucked in the Tare UI.
After pressing long on the encoder button (I have just the encoder button), the scale swicht on and tare.
After the next click i get into the tare screen. In here the Checkmark and the X button are which out function.
Do you know what to do?
Or what i try /debug ?
Thanks
Hey,
have you been able find a solution. So I have everything set up and it seems to work, but I don't really know how to calibrate the scale.