Giters

rodralez / NaveGo

NaveGo: an open-source MATLAB/GNU Octave toolbox for processing integrated navigation systems and performing inertial sensors analysis.

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

size of F and G matrix

AliRamshini opened this issue · comments

commented

Hi, Dr Gonzalez
After I study your codes , figure out in your article , dimension of F matrix is 2121 but you programmed it 1515 , why?
and please submit a reference for more understanding a ZUPT algorithm and formula .
thank you .

commented

Hi Ali,

Static bias can be modeled as a sum of a deterministic part and a stochastic part. The deterministic static bias can be found using a calibration method in a laboratory. The stochastic static bias provides a constant variation in the bias every time the IMU is switched on (run-to-run variation). This error ca be compensated by the Kalman filter.

Previous versions of NaveGo compensated the stochastic static biases but we realized that this error was also captured by the stochastic dynamic biases, so the compensation of stochastic static biases was dropped and the state vector was reduced from 21 states to 15 states.

The ZUPT algorithm was taken from "Principles of GNSS, Inertial, and Multisensor Integrated Navigation Systems", Second Edition, by Prof. Paul D. Groves, section 15.3 (Zero Updates).

Kind regards.