G-Helper (GHelper)

Language: English | 中文

Control tool for Asus laptops

Lightweight Armoury Crate alternative for Asus laptops. A small utility that allows you to do almost everything you could do with Armoury Crate but without extra bloat and unnecessary services. Works on all popular models, such as ROG Zephyrus G14, G15, G16, M16, Flow X13, Flow X16, TUF, Strix, Scar, ProArt and many more! Feel free to try :)

🎁 Main advantages

Seamless and automatic GPU switching (without asking you to close all apps, etc)
All performance modes can be fully customized (with fan curves and PPTs)
Very lightweight and consumes almost no resources, doesn't install any services. Just a single exe to run
Simple and clean native UI with easy access to all settings
FN-Lock
Doesn't need administrator privileges to run (*)

💾 Download G-Helper App

If you like this app, please star ⭐ it on Github and spread a word about it!

Support project in 💶 EUR | 💵 USD | 💳 Stripe

If you post about the app - please include a link. Thanks.

⚡ Features

Performance modes: Silent - Balanced - Turbo (built-in, with default fan curves)
GPU modes: Eco - Standard - Ultimate - Optimized
Laptop screen refresh rate 60hz or 120hz (144hz, etc) with display overdrive (OD) and miniled multizone switch
Custom fan curve editor, power limits (PPT) and turbo boost selection for every performance mode
Anime matrix control thanks to Starlight + some tweaks from my side including animated GIFs, clock and audio visualizer
Keyboard backlit animation and colors (including sleep animation and support for TUF models)
All basic and custom Keyboard hotkeys (M-keys, FN+X keys)
Monitor CPU / GPU temperature, fan speeds and battery discharge rate
Battery charge limit to preserve battery health
NVidia GPU overclocking
XG Mobile Control
AMD CPU Undervolting

⚙️ Automatic switching when on battery or plugged in

Performance modes (app remembers last mode used on battery or when plugged)
Optimized GPU mode - disables dGPU on battery and enables when plugged
Auto Screen refresh rate (60hz on battery, 120+ hz when plugged)
Keyboard backlight can be turned off on battery

To keep auto switching and hotkeys working the app needs to stay running in the tray. It doesn't consume any resources.

🚀 Performance Modes

Modes are same as in Armoury Crate as they are stored in bios including default fan curves

Silent (minimal or no fans, 70W PPT total, up to 45W PPT to CPU) + Best power efficiency setting in windows
Balanced (balanced fans, 100W PPT total, up to 45W PPT to CPU) + Balanced setting in windows
Turbo (intense fans, 125W PPT total, up to 80W PPT to CPU) + Best performance setting in windows

PPTs are shown for G14 2022, for other models PPTs will be different as they are set in bios.

🎮 GPU Modes

Eco mode : only low power integrated GPU enabled, iGPU drives built in display
Standard mode (MS Hybrid) : iGPU and dGPU enabled, iGPU drives built in display
Ultimate mode: iGPU and dGPU enabled, but dGPU drives built in display (supported only on G14 2022 model)
Optimized: disables dGPU on battery (Eco) and enables when plugged (Standard)

❓ FAQ

How do I stop the Armory Crate install popup appearing every time I press the M4 / Rog key?

Stop ArmouryCrateControlInterface service under windows Services app or you can stop all asus services all together from Extra -> Stop services

Why is Ultimate GPU mode not available on my laptop?

Ultimate mode is supported (by hardware) only on 2022+ models

I don't see GPU modes section

Some older models (for example G14 2020) don't support disabling GPU on hardware level, therefore GPU section makes no sense for them and will be hidden

Should I apply custom power limits (PPT) and fan profiles?

You don't have to, it's purely optional. From my experience built in (in bios) performance modes work well. Limit your power or apply custom fan curves only if you have issues. As soon as you click Apply in the fan + power section bios will be considering the fan profile as "custom"! (no matter if you modified it or not)

How does G-helper control my fan speeds?

It doesn't. Your bios does (same as in case with armoury). What G-helper can do - is (optionally) set a custom fan profile to current performance mode consisting of 8 pairs of temperature + fan speed % via same endpoint armoury seem to use.

How do I change fan % to fan RPM?

Click on them

I don't see a GPU temperature in G-helper

Most probably either you are using Eco / Optimized mode and your dGPU is simply off, or your windows has put the dGPU into sleep (to preserve power). In this situations G-helper won't be able to reach your GPU and get readings

I don't see app after starting it

Please check system tray for a (G) icon. By default windows is keen to hide all icons, so you may need to click ^ to see them all. I would advise to right click on Task Bar select Task Bar Settings -> Other System Tray icons -> Mark G-Helper to be always ON.

App crash or doesn't work properly what should I do ?

Open "Event Viewer" from start menu, go to Windows Logs -> Application and check for recent Errors mentioning G-Helper. If you see one - please post a new issue with all details from this error.

Battery charge limiter is not working

It could be that Asus services are overwriting this limit after. You may want to stop them by clicking "Stop" in Asus Services section (under Extra).

Can I use MyASUS app along with G-Helper?

You can, the only problem is that MyASUS may override the battery charge limit that you set before. My advice in such a situation would be to set the same limit (i.e. 80%) in both MyASUS and G-Helper.

How do I set Mute Microphone to M3?

If you have Asus Optimization Service running, it's controlled by that service (therefore G-helper doesn't interfere and doesn't touch this function). Alternatively you can stop that service - and you can bind M3 to anything you want.

How do I set different "Visual styles"?

Personally, i'm not a big fan of them, as they make colors very inaccurate. But if you want so - you can adjust display colors using either Nvidia Control panel or AMD Adrenaline (appropriate display sections). If you really want you can also use own ASUS utility from MS Store

Can I overclock Nvidia GPU core / memory?

Make sure that your dGPU is enabled (i.e. it's not in Eco mode). Open Fans + Power section and adjust core / memory clock offsets. They work same as in armoury's manual mode. Please keep in mind that (unfortunately) you need admin permissions for that, and app will ask you for them. (*)

Windows defender marks app download as malware / virus

False positives from Windows Defender (or any other similar system that uses machine learning for detection) is possible as application is not digitally signed with a certificate. You can always download a version below or compile app by yourself. All application sources are open and can be monitored from A to Z :)

Where can I find app settings or logs ?

You can find them under %AppData%\GHelper folder. Please include them when posting a new bug-report or issue.

App refuses to run on startup / runs without icon in tray on startup

Open app, and uncheck and check again "run on startup". If it still doesn't help (by some reason), you can try to manually edit "GHelper" task in windows Task Scheduler, and add couple of seconds delay to start.

How do I uninstall G-helper?

G-helper is a single exe, and it doesn't install anything in the system. To remove it - you can simply delete exe :) If you have applied any custom fan profiles or PPTs - before removing I would recommend selecting your favorite performance mode (for example balanced) and clicking "Factory defaults" under Fans + Power.

Can I undervolt my CPU ?

Currently you can undervolt AMD CPUs. If your model supports that - you will see undervolting slider under Fans+Power -> Advanced. If you don't see slider there, it means your CPU doesn't support undervolting. Full list of models that suppor that can be found here

I have G14 2023 and my GPU refuses to disable/enable

It seem to be an issue in older BIOS versions. As users report - latest BIOS 310 (installable via myasus / g-helper -> updates) resolves all issues :) So please update.

I have uninstalled Armoury andmy GPU performance is lower than it was

Check your NVidia Experience settings and make sure that you have Whisper Mode set to OFF. Also you can go to reset all settings Nvidia Control panel -> Manage 3D Settings -> Reset to defaults

How do I do a hardware reset on a laptop?

All Asus laptops have an option to do a hardware reset that can be handy sometimes. It doesn't touch your data, but resets all main hardware-related things (enables your dGPU, wakes up wifi/bt adapter if it hanged by some reason, etc). Turn OFF laptop. Press and hold "power" button for 30-40 seconds. Then boot normally (it will take a bit longer to boot)

What is G-helper ?

G-Helper is a lightweight Armoury Crate alternative for Asus laptops. A small utility that allows you to do almost everything you could do with Armoury Crate but without extra bloat and unnecessary services.

💶 Support Project

If you like the app you can make a Donation

Paypal in EUR	Paypal in USD

How to run

Download latest release
Unzip to a folder of your choice (don't run exe from zip directly, as windows will put it into temp folder and delete after)
Run GHelper.exe

Requirements (mandatory)

Microsoft .NET7. Most probably you already have it. Otherwise download it from the official website.
Asus System Control Interface v3+. This "driver" from asus should be installed automatically by windows update or along other asus apps. If it's not the case by some reason - you can download and install it manually.

Recommendations (optional)

It's not recommended to use an app in combination with Armoury Crate services, because they adjust the same settings. You can uninstall it using AC own uninstall tool. Just in case, you can always install it back later.
It's not recommended to have "ASUS Smart Display Control" app running, as it will try to change refresh rates and fight with g-helper for the same function. You can safely uninstall it.
You can stop / disable unnecessary services: Go to Extra in the app, and press "Stop" in Asus Services section (former debloat.bat). To start / enable services back - click "Start" instead (former bloat.bat)
It is strongly recommended to run app with windows default "balanced" power plan

Designed and developed for Asus Zephyrus G14 2022 (with AMD Radeon iGPU and dGPU). But could and should potentially work for G14 of 2021 and 2020, G15, X FLOW, and other ROG models for relevant and supported features.

I don't have a Microsoft certificate to sign the app yet, so if you get a warning from Windows Defender on launch (Windows Protected your PC), click More Info -> Run anyway. Alternatively you can compile and run project by yourself using Visual Studio :)

Power user settings

GENERAL NOTE: "Power user" settings require some config edits. Before making any changes to config.json - quit G-Helper. Make your changes. Run G-Helper again.

Manual app language setting

By default app will use your windows language setting. But you can set language manually (if it supported of course)

Add following line to %AppData%\GHelper\config.json : "language" : "en" (by replacing "en" with language of your choice)

Custom windows power plans with each mode

In %AppData%\GHelper\config.json you can manually add custom power plan (or power mode) GUID. It can be either "real" power plan that can be switched or "overlay" power plan like the ones g-helper sets by default.

Format is following : "scheme_<mode>" : "GUID" Where mode = 0 (balanced), 1 (turbo), 2 (silent)

Default behaviour is :

"scheme_0": "00000000-0000-0000-0000-000000000000",
"scheme_1": "ded574b5-45a0-4f42-8737-46345c09c238",
"scheme_2": "961cc777-2547-4f9d-8174-7d86181b8a7a",

Make sure to keep json structure (i.e. not to break it with extra or missing comas, etc) - or app will fail to read it and will just recreate a new config instead.

Custom hotkey actions

App supports custom actions for M3, M4 and FN+F4 hotkeys. To set them select "Custom" next to appropriate hotkey and do one of the following:

To run any custom application - put a full path to exe into "action" text field, for example: C:\Program Files\EA Games\Battlefield 2042\BF2042.exe
To simulate any windows key - put appropriate keycode into "action" field, for example 0x2C for Print screen. Full list of keycodes https://learn.microsoft.com/en-us/windows/win32/inputdev/virtual-key-codes

Force Standard mode on shutdown / hibernation

In some rare cases G14 2023 seem to have issues with enabling / disabling dGPU - i.e. Eco mode. Till we wait for a fix from asus on BIOS level, one of the proposed solutions is to always shutdown laptop in Standard mode (then everything seem to work fine). To enable "forced" Standard mode on shutdown add following line to %AppData%\GHelper\config.json

"gpu_fix" : 1,

Disable OSD

You can disable app's OSD (for performance modes, keyboard backlight, etc) by adding following line to %AppData%\GHelper\config.json

"disable_osd": 1,

Keybinding to toggle performance modes (on external keyboards)

By default app will toggle performance modes with Ctr+Shift+F5. You can change this binding by adding "keybind_profile": 116 in config.json (under %AppData%\GHelper), where 116 is numerical code for desired key. Put 0 to completely disable this binding.

Keybinding to open G-helper from external keyboards

Ctrl + Shift + F12

Libraries / projects used

Linux Kernel for some basic endpoints in ASUS ACPI/WMI interface
NvAPIWrapper for accessing Nvidia API
Starlight for anime matrix communication protocol
UXTU for undervolting using Ryzen System Management Unit

Disclaimers "ROG", "TUF", and "Armoury Crate" are trademarked by and belong to AsusTek Computer, Inc. I make no claims to these or any assets belonging to AsusTek Computer and use them purely for informational purposes only.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. MISUSE OF THIS SOFTWARE COULD CAUSE SYSTEM INSTABILITY OR MALFUNCTION.