Raimon7's repositories
RavonR4ControlCANviaBluetooth
Control the CAN network via Bluetooth. Android application, and the physical implementation of the connection to the car using esp8266 + HM-10 and MCP2515
arduino-canbus-monitor
Can bus monitoring tool based on arduino and can bus shield. Implements CAN ASCII/SLCAN protocol compatible with Lawicel CAN232/CANUSB. Can be used for monitoring low speed CAN (interior can bus of most cars, less than 500kbps). For higher speeds serial port can become a bottleneck in case data density is high.
arduino-OBD2
An Arduino library for reading OBD-II data from your car over CAN bus
BMW-OBD2
Custom made RPM Tachometer with Addressable LEDS and LCD Display
CANdevStudio
Development tool for CAN bus simulation
canDrive
Tools for hacking your car
efiboots
Manage EFI boot loader entries with this simple GUI
ESP32-OBD2-Gauge
DIY bluetooth obd2 gauge with ESP32
evDash
EV dashboard - software for small dev boards connected to the car via obd2 BLE4 or CAN bus.
FiatStiloConnectNavOAP
Integrate Raspberry Pi with MCP2515 module into Fiat Stilo's CANbus network for enhanced connectivity and control. Use on own risk!!
HID
Bring enhanced HID functions to your Arduino!
HyundaiCan
Hyundai CANBus audio control
HyundaiElantraCN7-OBD2-PIDs
List of OBD2 PIDs supported by Hyundai Elantra CN7
IniFile
Arduino library to parse ini files.
it_c_reco_arduino
Habilita receptor gps; arduino nano / pro / pro mini + 2 mcp2515
LCD-Stick-Tachometer-OBD
動画で使用したスケッチ:Nanoを使用して組み込み。MCP2515モジュールを使用して200ミリ秒ごとにエンジン回転をリクエスト。 Sketch used in the video: Built in using Nano. Request engine rotation every 200ms using the MCP2515 module. Displayed on the LCD stick.
MercCanTemp
displaying the engine and transmission temperature on an SSD1306 OLED with data captured by a MCP2515 from canbus
MQB-sniffer
CAN-BUS sniffing for Volkswagen Golf MK7 (and most likely other MQB platform cars)
MSCan_Gauge
Megasquirt Gauge using CAN bus.
MySQL_Connector_Arduino
Database connector library for using MySQL with your Arduino projects.
nvidia-control-linux
Bash script to control clock speed, memory speed, power limit, user defined automatic fan control, LED brightness and power state for Nvidia graphics cards on Linux. (allows overcloking / undercloking)
nvidia-smi-gui
A Qt based GUI backend for monitering nvidia graphic devices through nvidia-smi.
OBD-data-logger
動画で使用したスケッチ 。データ送信側:Nanoを使用しMCP2515モジュールでCAN通信、約200msでシリアル(UART)送信。受信側:Unoに3.2インチ TFT Display シールドを装着。 The sketch used in the video. Data transmission side: CAN communication with MCP2515 module using Nano, serial (UART) transmission in about 200ms. Receiving side: A 3.2-inch TFT Display shield is attached to Uno.
OBD2-Arduino
Arduino-OBD2 connection project
RaceChronoDiyBleDevice
DIY BLE device for RaceChrono, currently supports reading data from the CAN bus
Seeed_Arduino_CAN
Seeed Arduino CAN-BUS library - MCP2518FD&MCP2515&MCP2551
serial_pair_sniffer
The script connects two com ports together while monitoring the communication between them.
uds-decoder
UDS Decoder zur vereinfachten Umrechnung von Diagnoseabfragen
W203-canbus
Open source project for W211/W219 W203/W209 Mercs - bluetooth audio control and more!