pyrohaz's repositories
STM32F0-PCD8544GraphicAnalyzer
A graphic spectrum analyzer based around the STM32F0 discovery board and a PCD8544 LCD
STM32F0-uSpeechPort
A port from Arjo's uSpeech library (originally intended for Arduino)
STM32F0-UARTAnyPin
A simplistic method of receiving UART data to any pin with EXTI capability. Allows reception of UART data without a dedicated UART module in a non blocking fashion!
STM32F0-FastADC
Testing the maximum speeds for the internal STM32F0 ADCs!
STM32F0-SSD1306
A pretty old example of the STM32F0 discovery board and an SSD1306 OLED LCD.
STM32F0-OV7670
An implementation of an OV7670 camera with FIFO, outputting the image to an ILI9163 LCD
STM32F0-SoftTouch
A simple software touch library for the STM32F0 Discovery board and equivalent boards. Utilizing a single external resistor, capacitive touch sensors can be made.
SSD1306_VHDLImplementation
An SSD1306 VHDL implementation written in Altera Quartus for my Cyclone IV development board
STM32F0-I2SQuadratureGenerator
A simple quadrature waveform generator using the STM32F0 Discovery board and an old Wolfson Microelectronics (now Cirrus Logic) I2S DAC.
STM32F0-ILI9163
A poor example of using the ILI9163 LCD with an STM32F0 discovery.
VGA-FPGA-SDRAM
The trio! I've not particularly paid much attention to the coding here so its not particularly efficient though it works.
OV7670-AlteraCycloneIV
Interfacing an OV7670 with an Altera Cyclone IV FPGA development board - Code for my blog post at www.hsel.co.uk
STM32F0-ADCModes
A small example to test different ways of sampling multiple ADC channels with minimal processor usage
STM32F4-VGAGenerator
A simple VGA generator based around the STM32F4 Discovery board
STM32F0-BipolarMotorDriver
Bipolar stepper motor driver based around an STM32F0 discovery board.
STM32F0-AnyPinServo
A library and implementation allowing any GPIO pin to be used to drive a servo!
STM32F0-OV7670DMA-ILI9163LCD
Using the STM32F0 Discovery board and DMA to transfer pixels from an OV7670 camera sensor to an ILI9163 160x128 pixel LCD.
STM32F0-BasicBoost
Super simple boost converter requiring no processing support other than TIM1.
STM32F0-GPIOTutorial1
A tutorial on using CubeMX to initialize the GPIO of an STM32F0 discovery board. Full tutorial can be found on my blog: www.hsel.co.uk
STM32F0-HMC5883_Barebones
A really simplistic STM32F0 test platform for the HMC5883. The compass IC registers are read by us mere humans using the debugging tool integrated into CooCox. Another upload for my blog!
STM32F0-HMC5883L_Interrupt
An STM32F0 discovery board with a HMC5883L magnetometer, streaming data through I2C to the microcontroller utilizing interrupts
STM32F0-NormalisedCompass
A small program to create a normalised compass using the HMC5883L magnetometer and displaying the rest on a UC1701X LCD
KinematicSimulator2018
A kinematic simulator
MSP430-GPIOTest
A simple test program and library for the GPIO on an MSP430 Launchpad board
PIC10-BuckConverter
A low cost buck converter based around a PIC10F320
SDL_ButtonLib
A small implementation of buttons in SDL using the same base graphics library as my microcontroller LCD code.
TrafficSimulator2018
+ RIchard
Vitalitanks
Top down tank simulator
ZombieSurvivalGame-Ascension
Zombie survival game