New project for LEGO Transformation Vehicle 42140 with powered up remote

[mikeyupol]

Hi,

I have put together some code to allow the powered-up remote to control the LEGO transformation vehicle (item #42140). I used the Cat bulldozer project as a template. It's configured to drive like a car, i.e. left PLUS/MINUS control moving forward/backward and right PLUS/MINUS controls turning. This was more intuitive for me and my son than making each side control the respective track as is done in the app.

When the vehicle is moving either forward or backward, turns are more gradual. If the vehicle is stopped, turns are quicker (tracks are rotated in opposite direction with the max speed). If the vehicle is flipped the motors are run in reverse direction so that controls are unchanged (pressing forward still moves the vehicle forward).

I hope that this helps people to use the remote with this LEGO set. Maybe it could be added to the projects page.

from pybricks.pupdevices import Motor, Remote
from pybricks.hubs import TechnicHub
from pybricks.parameters import Button, Color, Direction, Port
from pybricks.tools import wait, StopWatch

# This drives like a car.
# Left +/- control going forwards/backwards, and right +/- turn.
# When the vehicle is moving turn is gradual, when it's stationary turn is faster.

remote = Remote()

hub = TechnicHub()

# TODO: I'm not sure what the max speed is, below is definitely a gross over
# exaggeration.  The only thing that's important is that TURN_SPEED be the same
# percentage of the max speed.
DRIVE_SPEED = 10000
TURN_SPEED = 650
DRIVE_ACCELERATION = 7000

# Initialize the motors.
right_motor = Motor(Port.A, Direction.COUNTERCLOCKWISE)
left_motor = Motor(Port.B)

left_motor.control.limits(acceleration=DRIVE_ACCELERATION)
right_motor.control.limits(acceleration=DRIVE_ACCELERATION)

while True:
    # Check which buttons are pressed
    wait(10)
    pressed = remote.buttons.pressed()

    # Choose forward/backward and turn right/left based on pressed buttons
    left_speed = 0
    right_speed = 0
    pitch, roll = hub.imu.tilt()
    sign = -1 if abs(roll) > 90 else 1
    speed = sign*DRIVE_SPEED
    turn = sign*TURN_SPEED
    if Button.LEFT_PLUS in pressed or Button.LEFT_MINUS in pressed:
        # Going forwards/backwards
        left_speed = speed
        right_speed = speed
        
        # Turn slowly when moving
        turn_right = Button.RIGHT_PLUS in pressed
        turn_left = Button.RIGHT_MINUS in pressed
        if (turn_right and sign > 0) or (turn_left and sign < 0):
            right_speed = turn
        elif turn_right or turn_left:
            left_speed = turn

        if Button.LEFT_MINUS in pressed:
            left_speed *= -1
            right_speed *= -1
    else:
        # Not moving, fast turn
        if Button.RIGHT_PLUS in pressed:
            left_speed = DRIVE_SPEED
            right_speed = -DRIVE_SPEED
        if Button.RIGHT_MINUS in pressed:
            left_speed = -DRIVE_SPEED
            right_speed = DRIVE_SPEED

    # Activate the driving motors.
    left_motor.run(left_speed)
    right_motor.run(right_speed)

[laurensvalk]

Thanks for sharing!

Maybe it could be added to the projects page.

Thank you. It may take a while, but we're happy to do that.