Issues with 0,6mm nozzle Prusa MINI
pukspuks opened this issue · comments
Original Prusa Mini +
FW 5.1.2.
Recently updated from 4.4.1
Nozzle 0,6mm
- DO not get Nozzle diameter warning. After FW update nozle diameter set to 0,4mm previous settings 0,6mm
- No warning about mismatch, warnings activated.
- Significant underextrusion on models used earlier. G-CODE in attachment.
AIS.CABLE.3D.BR.SET MINI GST PLA 240313_0.6n_0.3mm_PLA_MINI_3h15m.zip
@pukspuks This is the repository for the MK2, MK2.5/S and MK3/S/+ 8-bit printers. Please close your issue here and open it at https://github.com/prusa3d/Prusa-Firmware-Buddy which is for the MINI, MK3.5/9, MK4, XL 32-bit printers