pixeltris / GK6X

Hi all.

I have a GK61 and I dont have the <> ( lessthan greaterthan) keys in my keyboard. I want to map this keys to a layer but in the "dumpkeys" I dont have the keys.

How I can make this to work?

Thanks all for your job.

I think you'll need to use a macro for that as <> are only accessible via the shift modifier on ,.

[Macro(LessThan)]
Press:LShift+Comma

[Macro(GreaterThan)]
Press:LShift+Period

[Layer3]
Q:Macro(LessThan)
W:Macro(GreaterThan)

That example should map <> using macros to Q/W on layer 3.

For a full list of keys see

GK6X/GK6X/KeyValues.cs

Line 269 in 96e9c04

public enum DriverValue : uint

Thanks buts its not that easy, I don't have <> keys in my keyboard, then if I push LShift+Period I don't get it.

Its like I want to assign F13 to a key, how I can do that?

Even if you don't have the key on the keyboard that mapping should still work. An example of mapping Q to F13 on layer 3 is as follows:

[Layer3]
Q:F13

If you have comma/period, but LShift doesn't produce </>, then what does it produce?

Even if you don't have the key on the keyboard that mapping should still work. An example of mapping Q to F13 on layer 3 is as follows:
[Layer3]
Q:F13
If you have comma/period, but LShift doesn't produce </>, then what does it produce?

That's the point.

I dont have the native <> key for my keyboard distribution I use a mix of spanish keycaps in a american distribution, a photo:

https://i.imgur.com/U8Ho2cw.jpg

When I press the LShift plus </> I get ;: and with ALT plus </> I get nothing.

Thanks in advance.

https://en.wikipedia.org/wiki/QWERTY#Latin_America,_officially_known_as_Spanish_Latinamerican_sort

Assuming your OS is set to the Latin American layout (which it sounds like it is based on your key output) then you'll want the key between LShift and Z which can be found here:

GK6X/GK6X/KeyValues.cs

Lines 353 to 356 in 96e9c04

    
           /// <summary> 
        
           /// Key between left shift and Z 
        
           /// </summary> 
        
           AltBackslash = 0x02006400,

An example of mapping Q to </> on layer 3:

[Layer3]
Q:AltBackslash

Note that when you press the key you'll get < and you'll need to hold down shift to get > as that's how that key operates under Latin American.

Alternatively set your OS keyboard layout to US and buy a US keycap set, that way you can use </> normally.

Ref #51

Wroks perfect!!!!!

#Mayor que menor que
Comma:AltBackslash
Period:Macro(Great)

#Macros
#>
[Macro(Great,10,RepeatXTimes,1)]
Down:LShift
Press:AltBackslash

	/// <summary>
	/// Key between left shift and Z
	/// </summary>
	AltBackslash = 0x02006400,

Need help with not existent key