This is a series of plugins that create additional events that can be used in combination with jQuery when developing for mobile devices. The events are also compatible with desktop browsers to ensure ultimate compatibility for your projects. In time, we will update the Repository to include some very basic demos to get you started with using the events, but for now, we've put together a list of the events that are provided, and what they do.
As explained, the events are each triggered by native touch events, or alternatively by click events. The plugin automatically detects whether the user's device is touch compatible, and will use the correct native events whenever required. It is hoped that these events will help to aid single-environment development with jQuery for mobile web app development.
- tapstart
Fired as soon as the user begins touching an element (or clicking, for desktop environments). - tapend
Fired after the user releases their finger from the target element (or releases their mouse button on desktops). - tap
This event is fired whenever the user taps and releases their finger on the target element. Caution should be observed when using this event in conjuction without tap events, especiallydoubletap
. This event will be fired twice whendoubletap
is used, so it is recommended to usesingletap
in this case. - singletap
Unliketap
this event is only triggered once we are certain the user has only tapped the target element a single time. This will not be triggered bydoubletap
ortaphold
, unliketap
. Since we need to run some tests to make sure the user isn't double tapping or holding a tap on the target element, this event is fired with a short delay (currently of 500 milliseconds). - doubletap
Triggered whenever the user double taps on the target element. The threshold (time between taps) is currently set at 500 milliseconds. - taphold
This event is triggered whenever the user taps on the target element and leaves their finger on the element for at least 750 milliseconds. - swipe
This is called whenever the user swipes their finger on the target element. It is not direction-dependent, and is fired regardless of the direction the user swiped. - swipeup
Similar toswipe
, except only called when the user swipes their finger in an upward direction on the target element (i.e. bottom to top) - swiperight
Similar toswipe
, but triggered only when the user swipes their finger left to right on the target element. - swipedown
Similar toswipe
, but triggered only when the user swipes their finger top to bottom on the target element. - swipeleft
Similar toswipe
, but triggered only when the user swipes their finger from right to left. - swipeend
Theswipeend
event is trigged whenever a swipe event ends (i.e. the user finished moving their finger / cursor and released it). This event should be used to handle custom functions, since it will be triggered only when the swipe ends, rather than triggering immediately when the threshold has been met. - scrollstart
Triggered as soon as scrolling begins on the target element. - scrollend
Triggered as soon as scrolling is stopped on the target element. - orientationchange
This event is triggered when the orientiation of the device is changed. Please note that it uses throttling for non-mobile devices, or devices which do not support the nativeorientationchange
event. In the latter instance, a detection of the viewport size change occurs.
Each event now features a second argument that can be passed to the specified callback function. This argument includes some basic data relating specifically to the event, and can be accessed as a standard JavaScript object. To hook into this parameter, you should use the following code:
$(element).swipeend(function(e, touch) { });
Given the example above, touch
will now contain some basic data that can be accessed through touch.
. The first argument will represent the last native event that occured (the names used for these two arguments is irrelevent).
Each event provides different callback data. The following shows the numerous data that are passed back to the callback function inside the second parameter:
##tapstart
, tapend
, tap
, singletap
:
offset
- object containing the X and Y positions of the event relative to the element to which is was bound. Accessed through offset.x
and offset.y
respectively.
position
- object containing the X and Y positions of the event relative to the screen. Accessed through position.x
and position.y
respectively.
target
- the jQuery object from which the event was triggered.
time
- JavaScript timestamp the event occured (milliseconds since the Unix Epoch)
##taphold
:
duration
: the time in milliseconds that the user tapped for.
endOffset
- object containing the X and Y positions of the end event (i.e. when the user released their finger or mouse) releative to the element to which the event was bound. Accessed through endOffset.x
and endOffset.y
respectively.
endPosition
- object containing the X and Y positions of the end event (i.e. when the user released their finger or mouse) relative to the screen. Accessed through endPosition.x
and endPosition.y
respectively.
endTime
- JavaScript timestamp the taphold
was triggered (milliseconds since the Unix Epoch). This will ordinarily be equal to the startTime
+ taphold
threshold.
startOffset
- object containing the X and Y positions of the start event (i.e. when the user pressed their finger or mouse) releative to the element to which the event was bound. Accessed through endOffset.x
and endOffset.y
respectively.
startPosition
- object containing the X and Y positions of the start event (i.e. when the user pressed their finger or mouse) relative to the screen. Accessed through endPosition.x
and endPosition.y
respectively.
startTime
- JavaScript timestamp the taphold
started (milliseconds since the Unix Epoch).
target
- the jQuery object from which the event was triggered.
##doubletap
:
firstTap
- Object containing the same data as a tap
event, but for the first tap to occur.
lastTap
- Object containing the same data as a tap
event, but for the second (i.e. final) tap to occur.
interval
- the time in milliseconds between the two tap.
##swipe
, swipeup
, swiperight
, swipedown
, swipeleft
, swipeend
:
direction
- string representing the swipe direction (either up
, right
, down
or left
).
duration
- the time in milliseconds over which the swipe took place (for best results, use with swipeend
only, as this will typically be equal to the defined swipe-threshold
.
xAmount
- number of pixels the swipe occupied on the X-axis (returned regardless of direction).
yAmount
- number of pixels the swipe occupied on the Y-axis (returned regardless of direction).
startEvent
- Object containing the same data as a tap
event, but captured when swiping begins.
endEvent
- Object containing the same data as a tap
event, but captured when swiping is complete.
I have put together a simple demo application that shows the numerous events in action. The console on the left hand side is used to show information about the events that have been called. You can examine the code easily by viewing the page's source to lear more about how this works. Please click on the below to check out the demo:
http://ben-major.co.uk/jquery-mobile-events/
Please be aware that this demonstration uses Google's hosted jQuery file, and also pulls the latest version of the events library from GitHub. It is a great place to check the status of the library. Since this demo uses the vanilla code, it is a good idea to check the library functionality here for your own reference. If you're running into problems with the library, please check this demonstration using your device in the first instance. You can scan in the QR below to go directly to the web page:
All of the events outlined above have been written using jQuery's event.special
object, and so can be used in conjuction with jQuery's event handling functions, as well as shortcut wrappers.
Binding a tap
event to an element:
$('#myElement').bind('tap', function(e) { console.log('User tapped #myElement'); });
Using with .on()
and .live()
:
$('#myElement').live('tap', function(e) { console.log('User tapped #myElement'); });
$('#myElement').on('tap', function(e) { console.log('User tapped #myElement'); });
Triggering the event:
$('#myElement').trigger('tap');
Removing the event with .off()
, .die()
and .unbind()
:
$('#myElement').off('tap', hander);
$('#myElement').die('tap', hander);
$('#myElement').unbind('tap', hander);
Using method wrapper:
$('#myElement').tap(function(e) { console.log('User tapped #myElement'); });
Method chaining:
Chaining has also been preserved, so you can easily use these events in conjuction with other jQuery functions, or attach multiple events in a single, chained LOC:
$('#myElement').singletap(function() { console.log('singletap'); }).doubletap(function() { console.log('doubletap'); });
You can also define custom thresholds to be used for swipe
events (swipeup
, swiperight
, swipedown
and swipeleft
) to prevent interference with scrolling and other events. To do so, simply assign a data-xthreshold
or date-ythreshold
to the target element as follows:
<div id="mySwiper" data-xthreshold="500"></div>
The value you define is the difference in pixels that the user must move before the event is triggered on the target element. If no threshold is defined, a default of 50px will be used.
data-xthreshold
defines the horizontal threshold.
data-ythreshold
defines the vertical threshold.
The library works with jQuery 1.7.0+. All major browsers have been tested without problem. The library is not compatible with jQuery < 1.7.
Licensed under the MIT License:
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.