petous22

M.I.B._More-Incredible-Bash

M.I.B. - More Incredible Bash - The Army knife for Harman MIB 2.x aka MHI2(Q) units

ChanSort

TV channel list editor for Samsung, LG, Sony, Hisense, Panasonic, Philips, Sharp, Toshiba and MANY more.

TSDZ2-Smart-Ebike-860C

Flexible OpenSource firmware for TongSheng TSDZ2 mid drive ebike motor and pheriperals

GRBL-Plotter

A GCode sender (not only for lasers or plotters) for up to two GRBL controller. SVG, DXF, HPGL import. 6 axis DRO.

PortSniffer

ENLYZE PortSniffer - Monitor the traffic of arbitrary serial or parallel ports

LaserGRBL

Laser optimized GUI for GRBL

grbl

An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on a straight Arduino

ebike

Comissioning a TongSheng TSDZ2 mid drive motor with the Bafang 860C display

BafangWebConfig

Web based configuration tool for Bafang BBSxx e-bike motors

Bafang_M500_M600

speeed

Awesome E-bike Configuration Tool and Display

Pool-solar-heater-control-and-weather-station

Arduino Uno WiFi REV2 temperature of pool and solar panel control + weather in Osek u Duchcova, Czech Republic, MAX 6675 thermocouple and BME280

klipper-macros

A collection of my Klipper G-code macros.

AAAD

AA-Tweaker

Tool to apply patches to Google Play Services that will enable some extra functionality on Android Auto

FUGU-ARDUINO-MPPT-FIRMWARE

An open source Arduino ESP32 MPPT Charger firmware equipped with charging algorithms, WiFi, LCD menus & more!

fluidd

Fluidd, the klipper UI.

openpilot

openpilot is an open source driver assistance system. openpilot performs the functions of Automated Lane Centering and Adaptive Cruise Control for 250+ supported car makes and models.

PrusaSlicer

G-code generator for 3D printers (RepRap, Makerbot, Ultimaker etc.)

Prusa-Firmware

Firmware for Original Prusa i3 3D printer by PrusaResearch

ArcWelderLib

A collection of projects used to convert G0/G1 commands to G2/G3 commands.

Grbl_Esp32

A port of Grbl CNC Firmware for ESP32

grbl

An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on a straight Arduino

klipper_config

This is the config of my Voron 2.4 350mm3 Serial:V2.660

Geeetech-A10-Exhaust-Fan

Add a exhaust fan and chamber sensor to the Geeetech A10

klipper

Klipper is a 3d-printer firmware

SimosHighSpeedLogger

VW_Flash

Flashing tools for VW AG control units over UDS. Compression, encryption, RSA bypass, and checksums are supported for Simos18.1/6/10, DQ250-MQB, DQ381-MQB, and Haldex4Motion-Gen5-MQB.

SimosTools

Tool to assist in tuning simos ECUs.

Simos18_SBOOT

Documentation and tools about Simos18 SBOOT (Supplier Bootloader), including a Seed/Key bypass and Tricore boot password recovery tool.