all packages throw 403 error
robvoi opened this issue · comments
I can't install any micropython package. All packages throw an error 403. The json in the pypi URL exists.
I have no idea on where to start searching. Can someone maybe point me to the right direction? Thanks!
python3 -m micropip install micropython-rosserial
results in:
Installing to: /home/robo/Downloads/
Queue: ['micropython-rosserial']
https://micropython.org/pi/micropython-rosserial/json
Warning: micropython.org SSL certificate is not validated
https://pypi.org/pypi/micropython-rosserial/json
Error installing 'micropython-rosserial': b'403', packages may be partially installed
I'm not sure either. My test script works:
$ micropip.py install -p ~/rats micropython-copy
Installing to: /home/adminpete/rats/
Warning: micropython.org SSL certificate is not validated
Installing micropython-copy 3.3.3.post2 from https://micropython.org/pi/copy/copy-3.3.3.post2.tar.gz
[adminpete@capybara]: /mnt/qnap2/data/Projects/MicroPython/micropython-samples/micropip
$ cd
[adminpete@capybara]: ~
$ cd rats/
[adminpete@capybara]: ~/rats
$ ll
total 12
-rw-rw-r-- 1 adminpete adminpete 8859 Jan 29 10:19 copy.pyThe micropip.py script is a port of the official upip.py so I attempted to install your package to an ESP8266 using upip. This failed:
>>> upip.install("micropython-rosserial")
Installing to: /lib/
Warning: micropython.org SSL certificate is not validated
Installing micropython-rosserial 0.2.8 from https://files.pythonhosted.org/packages/c5/e0/3b232b334011948b543811d3b9ed2e9ad9973ec2aa27dcb6b42156a082f3/micropython-rosserial-0.2.8.tar.gz
Error installing 'micropython-rosserial': [Errno 22] EINVAL, packages may be partially installed
>>> I then went on to install "mcropython-copy" and to check the outcome of both installs.
>>> upip.install("micropython-copy")
Installing to: /lib/
Installing micropython-copy 3.3.3.post2 from https://micropython.org/pi/copy/copy-3.3.3.post2.tar.gz
>>>
/home/adminpete/Downloads> ls /pyboard/lib/
copy.py
/home/adminpete/Downloads> So it correctly installed copy.py but did nothing with micropython-rosserial.
This suggests that either there is a problem with the package, or there is a bug or limitation in upip. I am not knowledgeable about pypi: if you are convinced that the package is valid, it might be best to raise an issue against upip and I will port any changes the maintainers make to micropip.
Sorry I can't offer anything more authoritative.
Thanks for the swift reply and your time for testing it.
I found your script as it woks for the pi pico which doesn't have wifi. That's why I got stuck with upip and hoped to have a solution with your script.
It is possible to run official upip under the Unix build of MicroPython, but on the basis of my test this won't fix your problem. You might ask in the forum: maybe someone will have an idea of why upip can't access that repository.
However, as a straight port of upip, I will only implement changes to micropip in response to improvements in upip.
I have updated the micropip README to explain this issue.