patrykk / linux-udoo

Udoo Linux Kernel

linux-udoo

Linux Udoo Kernel - 4.4.x This branch base on 3.14.54-ga freescales kernel - vivante driver 5.0.11p7.3

Howto install:

Configure kernel

make menuconfig (or use udoo config file: make udoo_quad_defconfig)

Compile kernel

make zImage modules (or just: make -j5)

install modules

make modules_install

copy kernel file

cp arch/arm/boot/zImage /boot/

compile dtb file

make imx6q-udoo.dtb (for quad)
make imx6dl-udoo.dtb (for dl)

copy dtb file

cp arch/arm/boot/dts/imx6q-udoo.dtb  /boot/ (for quad)
cp arch/arm/boot/dts/imx6dl-udoo.dtb  /boot/ (for dl)

copy firmware

cp firmware/imx/sdma/sdma-imx6q.bin /lib/firmware/imx/sdma/

configure your uboot

Versions

This has been tested with:

• uboot-udoo-quad 2015.1 / uboot-udoo 2015.10-rc3
• libcec-imx6 13.20141201
• xf86-video-imx-viv 5.0.11.p7.1
• gst-imx 0.11.1.r10.gb94ea3c-1
• imx-lib 5,1
• imx-vpu 5.4.31-1 (3.14.38)
• firmware-imx 5.2
• imx-gpu-viv-g2d 5.0.11.p7.1 (previous name: gpu-viv-g2d)
• imx-gpu-viv-(x11|fb) 5.0.11.p7.1 (previous name: gpu-viv-bin-mx6q)
• libfslvpuwrap 1.0.58 (3.14.38)
• libfslcodec - 4.0.7
• libfslparser - 4.0.7
• libimxvpuapi (branch vpulib-backend - git)
• Xorg server 1.17.x
• libcec-imx6 13.20141201

What Works and What Doesn't

Work:

• wifi (stable)
• VPU
• GPU
• HDMI video (with DVI adapter too) (kernel commands for stable HDMI: video=mxcfb0:dev=hdmi,1920x1080M@60,bpp=32)
• LVDS support (kernel commands : video=mxcfb1:dev=ldb,LDB-WVGA,if=RGB666,bpp=32) (you need gpio-backlight for backlight support)
• Xorg driver with xrandr
• OpenCL
• HDMI audio
• Analog Audio (codec vt1613)
• ASRC
• sam3x port
• i2c (no tested - could be unstable)
• OTG (f.ex. modprobe g_mass_storage file=/dev/mmcblk0p1)
• imx watchdog
• imx thermal
• GPIO - (check documentation for pins scheme and execute f.ex. "echo 40 > /sys/class/gpio/export" for gpio40)
• PWM (for inverted polarity we added small patch)
• SATA - on quad
• CAN
• Arduino with Udoo patch (we dont need reset sam3x via gio's. Please use last a arduino-udoo and reset via BOSSAC driver)
• gstream vpu
• freescale camera
• touch screen 7' and 15'
• CAAM
• SPI (change disabled to okay in dtsi file)
• 1wire (base on onewire-gpio - change disabled to okay in dtsi file)

Tested apps

• XBMC (preloaded framebuffer libs)
• gstream
• chromium with EGL and flash 12.x
• neverball
• stellarium
• celestia

Doesn't Work

• PCIe